Rudder FeedbackSimrad rudder feedback units are high resolution units which contribute to gentle yet accurate steering that characterize the Simrad autopilots. They are rugged units designed to withstand the environment. Though Simrad now offers the virtual rudder feedback VRF™ for outboards and stern drive boats up to 40', it is...

RF25N Rudder Feedback w/Link & Micro-C Cable - 5MThe RF25 is a medium duty rudder feedback unit with Micro-C interface. The RF25 will attach directly to industry standard Micro-C systems for straight-forward installation.Features: +/- 120° Measurement Precise and Accurate; +/- 0.5° Micro-C Connectivity 5.5M attached Micro-C Cable Specifications: Type: Parts...

NAC-2 Low Current Course ComputerThe NAC-2 Autopilot Computer is the brains behind your Simrad autopilot system. It contains the electronics needed to operate a hydraulic steering pump or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units. The NAC-2 was designed for boats...

NAC-2 Autopilot Core Pack - NAC-2, Precision-9, RF25N & N2k Starter KitComprising of the high-current NAC-2 autopilot computer, Precision-9 compass and RF-25 rudder feedback unit ideal for smaller vessels, designed to run small hydraulic drives and mechanical drives for vessels up to 10M (33') in length.The NAC-2 Autopilot Computer is...

NAC-3 Autopilot Core Pack - NAC-3, Precision-9, RF25N & N2k Starter KitComprising of the high-current NAC-3 autopilot computer, Precision-9 compass, RF-25 rudder feedback unit & N2k Starter Kit.The NAC-3 Autopilot Computer is the brains behind your autopilot system. NAC-3 contains the control algorithms developed to helm a yacht across a...

Type S for Straight Shaft Helms for Cable Steered Boats with Dash Mounted WheelFeatures: Replaces existing helm Electronic clutch disengages for manual steering Rotary drive system Fits behind dash Safety override technology Current 1.25A Typical, 5A Peak Wireless control module plus handheld pendant - steering in the palm of your...

Hydraulic Ram Type 1 - 12VHigh power, efficient drive units for maximum power with minimum consumption Ram allows the Power Steer Mode on the Pilot to be used in case of manual steering failure Integrated hydraulic system: no external hoses, reservoirs, etc... Specifications: Type: Pumps/Drives Box Dimensions: 7"H x 11"W...

Verado Autopilot Fitting Kit for Mk2 Pumps with SteadySteer SwitchFitted hose kit designed for simplified SteadySteer installation into Verado steering systems, reducing the incidence of faulty field terminated hydraulic hoses and incorrect installation layouts.SteadySteer Benefits: Control the autopilot using the helm – enhanced usability Steer manually through turns - a...

Pump-2 MK2 Reversible Hydraulic Pump for SteadySteerFeatures: For cylinder displacement of 80 cc - 250 cc (4.9 - 15.2 cu. in) O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings SteadySteer compatible. (NAC-2 / AC12 required) Specifications: Type: Pumps/Drives Box Dimensions: 4"H x 4"W x 8"L WT:...

30CI Pumpset 12VDCPumpsets are beneficial because they are reliable, save on installation costs, bring twice the power and cut back on half the consumption. Specifications: Type: Pumps/Drives Box Dimensions: 5"H x 7"W x 12"L WT: 11 lbs UPC: 010407610252

Wireless Remote For adding a second pendant, or to replace original Can be paired in field with existing receiver Includes 2x AA Batteries Specifications: Type: Parts Box Dimensions: 2"H x 6"W x 7"L WT: 0.6 lbs UPC: 628309263348 Brochure (pdf)

12CI Pumpset - 12VDCThe 12CI Pumpset, 12 VDC is intended for use with Si-Tex autopilot systems.

ST4000MK2/ST4000+ Wheel Drive Only *Not A Complete PilotThe Raymarine ST4000MK2 is a SeaTalk compatible autopilot that will steer your boat to a heading automatically, accurately, and reliably.*Package contains wheel drive only - not a complete autopilot. Specifications: Type: Parts Box Dimensions: 8"H x 15"W x 16"L WT: 7.1 lbs UPC:...

RF40 Rudder Feedback Unit with 15M CableRudder Feedback for Smooth and Accurate Steering The RF40 is a medium-duty rudder feedback unit for use with NAC-1 and NAC-2 autopilot systems. Rudder feedbacks measure and report actual rudder angle to your autopilot computer, enabling precise rudder control for smooth and accurate steering.Direct Connection...

NAC-3 VRF Core Pack - NAC-3, Precision-9 & N2k Starter KitComprising of the high-current NAC-3 Autopilot computer, Precision-9 compass & N2k Starter Kit.The NAC-3 Autopilot Computer is the brains behind your autopilot system. NAC-3 contains the control algorithms developed to helm a yacht across a broad range of weather conditions...

Type A Controller f/Boats with an Existing Autopliot No need for additional drive units. The Intellisteer Wireless Controller is designed to be wired between a Course Computer and Autopilot Drive When the Intellisteer Wireless Controller is activated it will disconnect the autopilot and provide wireless jog steering control from anywhere...

Triton² Pilot Controller & Triton² Digital Display PackTriton² DisplayThe full-color Triton² Display provides sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data and more.An Optically Bonded display means absolutely zero condensation or fogging, while transflective LCD technology provides exceptional contrast...

Pump-3 MK2 Reversible Hydraulic Pump for SteadySteerFeatures: 12V DC: Reversible hydraulic gear pump 1.6L (98 cu.in) / min. For cylinder displacement of 160-550 cc (9.8 - 33.5 cu.in) O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings SteadySteer compatible. (NAC-3 / AC42 required) Specifications: Type: Pumps/Drives Box...

B&G H5000 Pilot ControllerEnjoy straightforward autopilot access, control and system setup of B&G's powerful H5000 Pilot from the dedicated keypad of this Pilot Controller unit. As the primary Pilot controller, or as a second station to a Zeus chartplotter, the Pilot Controller provides assured control and feedback via a high-resolution...

NAC-3 High Current Course ComputerThe NAC-3 Autopilot Computer is the brains behind your Simrad autopilot system. It contains the electronics needed to operate a hydraulic steering pump or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units. The NAC-3 was designed for boats...