Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - WhiteSikaflex®-291 is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. Used by many boat builders, its fast cure time makes it ideal for applications where speed is important.Uses:General all-purpose, marine adhesive and sealant, which may be used for light...

Liquid Life-Calk Sealant Tube - 2.8 FL. Oz. - BlackHas same outstanding properties as Life-Calk® Sealant such as long-lasting, permanently flexible, can be sanded, painted*** and used above and below the waterline. Tack-free in 1 to 3 days. Excellent resistance to teak oils, gasoline and diesel fuel. Ideal for teak...

Sikaflex® 291 LOT Slow Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - WhiteSikaflex®-291 LOT is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. It is a moisture cured, non-sag system designed with a long open time for jobs that require more time.Uses:General all-purpose, high strength marine sealant, which may be...

Git Rot Kit - 4ozUnique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry. Apply by injecting into wood. Will soak into wood by capillary action. One-half hour pot life after mixing. Cures overnight....

SikaBiresin® AP077 + BPO Cream Hardener - White - QuartFeatures: Gelcoat repair system Easy to apply – Easy to sand High heat-resistance of 400°F (209°C) Accepts virtually all types of finishes Low moisture absorption for above or below the waterline applications Minimal shrink or sink upon cure Bonds to epoxy,...

LifeSeal® Sealant Cartridge - AluminumA unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal® offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use...

Fix Repair Putty - 16oz - WhiteUnlike similar products on the market, Fix is a non-sagging repair putty that cures like steel.  Fix is completely cured after 24 hours and can even be used underwater.  Once cured, it can be drilled, tapped, sanded and painted.  It bonds to fiberglass, wood,...

Silicone Rubber Tube - 2.8 FL. Oz - BlackAn all-purpose, non-corrosive, non-yellowing, mildew resistant, low-odor, 100% marine high quality silicone sealant. Tack-free in 30 minutes or less. *Fully cured in 24 hours. For use above or below the waterline. Will not shrink, crack, or dry out. Superior flexibility and adhesion...

Elastomeric Marine Sealant - 10oz Cartridge - BlackA one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (48.9°C) and can be wet sanded and painted after curing. Flexibility and...

Sikaflex® 291 LOT Slow Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - BlackSikaflex®-291 LOT is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. It is a moisture cured, non-sag system designed with a long open time for jobs that require more time.Uses:General all-purpose, high strength marine sealant, which may be...

Adhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges (sold separately) When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.

Sikaflex® 521UV UV Resistant LM Polyurethane Sealant - 10.3oz(300ml) Cartridge - WhiteSikaflex®-521 UV is a multi-purpose, UV resistant, non-sag, elastic, one-part silane-terminated polymer sealant, which cures on exposure to atmospheric moisture to form a durable elastomer. Sikaflex-521 UV is solvent and isocyanate free.Uses:Sikaflex®-521 UV bonds well to a wide variety...

Primer-206 G+P Black 250ml BottlePigmented, solvent-based primer for various substrates. Sika® Primer-206 G+P is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives. Sika® Primer-206 G+P is specifically formulated for the treatment of bond faces prior...

BPO Cream Hardener White 4oz Tube Resin RequiredBPO (benzoyl peroxide) is a peroxide used for curing amine accelerated polyester resins and fillers. It leads to rapid hardening and de-molding, even at low temperatures.

BPO Cream Hardener Red 4oz Tube Resin RequiredBPO (benzoyl peroxide) is a peroxide used for curing amine accelerated polyester resins and fillers. It leads to rapid hardening and de-molding, even at low temperatures.

BPO Cream Hardener Black 4oz Tube Resin RequiredBPO (benzoyl peroxide) is a peroxide used for curing amine accelerated polyester resins and fillers. It leads to rapid hardening and de-molding, even at low temperatures.

SikaBiresin® AP112 White Gallon BPO Hardener RequiredSikaBiresin® AP112 is a fibrous filler that makes it very useful for increased bonding strength or for rebuilding broken or void areas in SMC, RIM, and other thermoset composites. It is a smooth thixotropic paste system that exhibits easy mixing and stable application qualities....

Git Rot Kit - PintUnique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry. Apply by injecting into wood. Will soak into wood by capillary action. One-half hour pot life after mixing. Cures overnight....

SikaBiresin® AP112 + BPO Cream Hardener - White - QuartFeatures: Structural bonding/repair system Fiber-filled for increased bonding strength For large scale repairs of broken FRP structures Easy to mix Excellent adhesive qualities WARNING: This product can expose you to chemicals which are known to the State of California to cause...

SikaBiresin® AP077 White Quart ** BPO Hardener Required **SikaBiresin® AP077 is a polyester filler and fairing compound that offers the user a smooth workable paste with a set fast cure to expedite those applications for repair or finish. It is easier to sand than conventional fillers and can be finished...