Type 1 Pump 12voltReversing hydraulic pump for use with steering systems equipped with 4.914 cubic inch (80cc 230cc) hydraulic steering rams. The Type 1 hydraulic drive is compatible with both S1/S1G and S2/S2G corepacks. Use the table below to determine the Type 1 hydraulic drive's capacity when used with each...

Type 1 Linear Drive - 12VLinear drive for mechancically steered vessels up to 22,000lb (10,000kg).Designed for boats with existing mechanical steering systems. The mechanical linear drive provides powerful thrust, fast hardover times and quiet operation. Features: Low backdrive force, to minimize the drives effect on the boats steering when the...

NAC-2 VRF Core Pack - NAC-2, Precision-9 & N2k Starter KitComprising of the high-current NAC-2 autopilot computer, Precision-9 compass and N2k Starter Kit.The NAC-2 Autopilot Computer is the brains behind your autopilot system. NAC-2 contains the control algorithms developed to helm a yacht across a broad range of weather conditions...

Pump-2 MK2 Reversible Hydraulic Pump for SteadySteerFeatures: For cylinder displacement of 80 cc - 250 cc (4.9 - 15.2 cu. in) O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings SteadySteer compatible. (NAC-2 / AC12 required)

Type 2 Pump 12VoltReversing hydraulic pump for use with steering systems equipped with 9.821 cubic inch (160-350cc) hydraulic steering rams. Compatible with 400 Series corepacks. Designed for boats with existing hydraulic steering systems. Specifications: Type: Pumps/Drives Box Dimensions: 4"H x 4"W x 6"L WT: 7.6 lbs UPC: 023193811215 Owner's Manual...

Type T - Straight shaft tilt version for mounting behind the dash with a steering wheel tilt facilityThis drive unit replaces a manual Tilt drive and is mounted directly behind the dash, but still allows the angle of the steering wheel to be changed. It uses the front end from...

Type S - Standard Straight Shaft f/Mounting Behind the DashThe Straight shaft drive unit replaces the manual drive used on cable steered boats and is mounted directly behind the dash. The drive is directly compatible with the Morse 290 steering helm but comes with its own bezel kit and can...

NAC-2 Autopilot Core Pack - NAC-2, Precision-9, RF25N & N2k Starter KitComprising of the high-current NAC-2 autopilot computer, Precision-9 compass and RF-25 rudder feedback unit ideal for smaller vessels, designed to run small hydraulic drives and mechanical drives for vessels up to 10M (33') in length.The NAC-2 Autopilot Computer is...

Lowrance Outboard Cable-Steer Pilot PackEverything you need in one box to fit an autopilot to your outboard motor, the Outboard Pilot lets you focus on fishing activity while keeping the boat on course. When connected to a Lowrance HDS Gen2 or Gen2 Touch, the Outboard Pilot can steer to a...

NAC-1 Precision Hydraulic Autopilot PackFeatures: Easy to install system pack, hydraulic connectors, and hoses all included Dash-mount button for one-touch Auto/Standby activation Steer to Heading, Course or Route Automatic Turn Patters NAC-1 Plug & Socket connectors reduce the installation time High efficiency, super-quiet 0.8L hydraulic gear pump In the Box:...

FU80 Remote Control w/DisplayThe FU80 (a manoeuvre controller) is a Follow Up remote which means that the rudder, when hand steering, moves to the commanded angle set by turning the knob to port or starboard.Features: 35mm x 25mm display Type approved Two mounting options - desktop and panel (flush) Network...

SP-80 - Control Head OnlyFor boaters who know where they're going. SP-80 takes you where you want to be--effortlessly. Its smart, precise piloting gives you the extra hand on deck you've always needed. And the operation is a snap: Simply set the course and the SP-80 takes the controls, piloting...

Autopilot Pump, 12 VDC, 1.7 Cubic Inches Per Second (For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume)The PUMPHRP17-12 is a reversing pumpset designed to interface the NavPilot series autopilot with a hydraulic steering system. The pump assembly incorporates a reversible gerotor gear pump, a two-piece...

PUMPOCT16-12 Pump 12V - 1.6 Cubic Inches for RAM Sizes 12-231,600CC/MIN OCTOPUS PUMP, 12V, 1.6 Cubic Inches per second (For Ram sizes from 12-23 Cubic Inches in volume).The Octopus pump's industry leading efficiency minimizes power consumption, and their design offers significantly quieter operation. The Octopus pump's small footprint provides the...

Integrated Rudder Feedback UnitsOC15SUK27ETypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.The...

EV-100 Wheel Evolution AutopilotFeatures: A complete autopilot-in-a-box Evolution Ai for superior performance No calibration required Quick and easy installation Fits most types of sailboat wheels Simple, robust clutch engagement For boats up to 16,500 lbs (7,500 kg) For 12V DC power systems Includes p70s Autopilot Controller Includes: EV-1 Sensor Core...

Autopilot Pump Type 1 Adjustable Reversing 12V Up To 15 CI CylinderTWICE THE POWERThe unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump.HALF THE POWER CONSUMPTIONGear pumps leak oil between the gears, while a piston (such as used in...

ST1000 Plus Tiller PilotST1000 Plus tiller autopilot for tiller steered sailing vessels up to 6,600 lbs (3,000 kg)*Note: Always take the fully laden displacement weight of the vessel into account; this is often 20% above the designed displacement.Includes: Instruction Manual Plus Tiller Pilot 12V Socket Tiller Pin  Mounting Socket  Specifications:...

Integrated Rudder Feedback UnitsOC15SUK27BTypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.The...

SP-70 Autopilot with Rotary Feedback for Inboards - No DriveLow Cost Autopilot Designed For Easy InstallationThe SI-TEX SP-70 Autopilot will add relaxation to your cruising and fishing activity. Designed for almost any boat and easily installed on Outboard, Inboard and Sterndrive vessels with Hydraulic or Mechanical steering systems.Features: Ultra-compact, waterproof...