Boat Outfitting - Fuel Systems

5/8” A2 Fuel & Vent Line Hose - Black - Sold by the FootTrident 5/8” ID A2 Fuel Hose is a gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). Features:  Sold by the foot  This hose is built with the best fuel, fire, and age-resistant formulation  Provides...

5/16" A1-15 Reel Low Permeation Fuel Line Hose - Black - Sold by the FootTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation...

5/16" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the FootTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation...

5/16" Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray - Sold by the FootThis hose is built with the best fuel and age-resistant formulations and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber. This greatly...

1-1/2" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the FootTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F...

1" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the FootTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F...

Combination Vented Gas Fill/Tank for 1-1/2" Hose - 35° Angled Neck Features: 35° Angled Neck Black Polymer Integral Tank Vent with Flame Arrestor No Ground Wire Required Flip Top Cap Specifications: For Hose Size: 1-1/2" For Vent Size: 5/8" Neck Length: 2-7/16 " Screw Size: #10

Deck Fills for Pressure Relief Systems - Straight Body - Scalloped Black Plastic CapAttwood's Pressure Relief Systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The...

4" ID 90-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover. Features: Four stainless steel t-bolt clamps Very high temp silicone/EDPM blend rubber - molded This...

10' White Stern Flex Hose with Transom FlangeThis Trident Stern Flex Hose is white (Trident Marine 129W series) and contains wire, control cables, and hoses between the transom and outboard engine(s). Connects to Trident flange part #142W-2000.Features: Highly resistant to crushing, abrasion, and UV and has good resistance to chemicals ...

5/8" x 50' Boxed Type A2 Fuel & Vent Line Hose - BlackTrident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.Features: Provides extraordinary resistance to aging, fire, heat,...

Portable Fuel Tank - 3 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards.Features:  3 Gallon fuel capacity Compatible with 1/4-inch NPT fuel fittings Additional oil and...

90° P-Trap Fuel Tank Vent - Black with Stainless Steel Trim CoverComposite 90-degree P-trap fuel tank vent 66419-3. These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns.  This eliminates the need for an anti-siphon loop in the...

Yamaha Fuel Line Kit 6' x 3/8"Attwood's low-permeation fuel line kits set the standard in performance, safety, and value. Along with featuring Attwood's award-winning Universal Sprayless Connector, these kits meet strict United States EPA regulations. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality...

Fuel/Water SeparatorKeep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability.Features: Double seal for enhanced performance Replacement for: Mercury 35-60494-1, Aqua Power 6031, GLM 24940, Sierra 18-78250, SMI 15494, Valmar 52113, Marpac 7-0872 Quick Guide (pdf)

Deck Fill for Carbon Canister System - Angled Body & Scalloped Black Plastic CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow...

Universal Fuel/Water Separator Kit with BracketKeep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability and fits all 2 and 4-cycle engines.Features: 10 Micron Filter and bracket included Outfitted with 2 brass plugs for secure connections and universal...

Deck Fill for Carbon Canister System - Angled Body & Scalloped Chrome CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum...

Outboard Fuel Filter - UniversalDisposable high-flow in-line fuel filters work with most outboard motors. Protects carbureted engines by trapping pollutants. A clear body allows visual inspection.Features: A clear body allows visual inspection, making it easier to stay on top of maintenance High-strength, impact-resistant, and shatter-resistant construction is ideal for  tough...

8" ID 45-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.Features: Four stainless steel clamps...