Boat Outfitting - Trolling Motor Accessories

Mounting Isolator KitAbsorbs shock and protects electronics. Ideal for mounting all marine accessories, electronics, and trolling motors without having to get under the deck or behind the console. The rubber limits vibration and provides a solid installation. MotorGuide factory isolators come with many of our mounts and are a quick...

Medium-Duty Trolling Motor ReceptacleMotorGuide's Medium-Duty Trolling Motor Receptacle is compatible with 12,24 and 36 volt trolling motors. Universal design for 2 or 3-wireconfiguration. Standard 1-1/8" diameter mounting hole. Watertight sealingcap. Drain holes in receptacle keep water away from electrical components.Accepts 8 and 10 gauge wire. Corrosion resistant Plated brass electrical...

Medium-Duty Trolling Motor PlugMotorGuide's Medium-Duty Trolling Motor Plug provides a solid, safeconnection. Compatible with 12, 24 and 36 volt. Accepts 8 to 16 gauge wire. O-ring seal for waterproof connections. Ergonomic grip for easy hook-upand ground blade alignment. Corrosion resistant Plated brass electrical components Weather resistant plug cover WARNING: This...

Easily remove your bow-mount motor with these high-yield composite brackets. They're ultra-strong, corrosion-resistant and feature a low-profile design that leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (not included).Compatible with any Foretrex, Maxxum Pro, All Terrain,...

Trolling Motor Tie-DownJust as we've taken retractable tie-downs to a whole new level,we're making standard rod hold-downs a thing of the past.We've added two great new "PLUS" features to this line of hook and loop hold-down products. SUR-Grip release handle allows for a comfortable,secure hold Rubber Grommets for maximum protection...

MKP-34 Prop & Nut Kit E Quickly, easily remove or replace your prop with this kit. Each kit includes a prop nut and washer. A crescent wrench is required for installation. Compatible with Minn Kota Props: MKP-33 Weedless Wedge 2 (part number 233160 / 1865018) WARNING: This product can expose you to...

MKP-23 Prop & Nut Kit D Quickly, easily remove or replace your prop with this kit. A crescent wrench is required for installation. Compatible with Minn Kota Props:MKP-24 Weedless Wedge (part number 2331130 / 1865013) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State...

Application: Shallow & DurabilityRecommended only for 36-volt Digital lower units, the Metal Machete is made out of cast aluminum and provides incredible thrust and long lasting durability. Used by top professionals, this is MotorGuide's most durable prop. (Includes propeller, prop pin and prop nut.)WARNING: This product can expose you to...

Matching two-prong, 12-,24-, or 36- volt power plug provides a solid, safe connection.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The Sonar Adapters are designed to provide clean, clear signals for the leading brands of sonar.83/200 kHz Traditional 2D sonar.Compatible with Xi5, Xi3 and older MotorGuide models that shipped standard with Lowrance 7-pin Blue/Gray connector.Not compatible with Tour or Tour Pro HD+ enabled motors. For the Following Models:Garmin: Fishfinder 80*, Fishfinder...

Made out of a high-impact composite, these mounting plates make removing your trolling motor and mount quick, fast, and simple. The universal hole-patterns fit most traditional trolling motor mounts and all traditional MotorGuide trolling motor mounts. Fits Gator Flex 360, Gator 20.5, 20.8, 21, 21R mounts and can be modified...

Protect your motor and boat wiring with this 50-amp Manual Reset Breaker.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The Sonar Adapters are designed to provide clean, clear signals for the leading brands of sonar.83/200 kHz Traditional 2D sonar.Compatible with Xi5, Xi3 and older MotorGuide models that shipped standard with Lowrance 7-pin Blue/Gray connector.Not compatible with Tour or Tour Pro HD+ enabled motors. For the following models:Humminbird: 100SX/100PT, 105SX, 200...

60-Amp Circuit BreakerMotorGuide's Waterproof 60-Amp Circuit Breaker. Protects your motor and boat wiring. Manual reset breaker is compatible with all 12, 24 and 36 volt trolling motors. Manual reset Compatible with all 12-, 24- and 36-volt trolling motors Completely waterproof

Pinpoint GPS Gateway KitThe MotorGuide Gateway Kit will take your fishing technology to the ultimate levelThe MotorGuide Gateway Kit will connect a Pinpoint GPS-equipped MotorGuide Xi5 trolling motor to a compatible Lowrance fishfinder/chartplotter through an existing NMEA 2000 network.Kit Includes: 1 - Pinpoint GPS-NMEA 2000 Gateway Cable (6'/1.8m) 1 -...

Mount For Greater Than 45" ShaftThe X3 mounting bracket is built tough with aircraft-grade extrudedaluminium to minimize flex and provide precision control under high-thrust. Improved rigidity and durability Easier to stow and deploy Wider base for added stability Stainless steel bushings in key wear points Easy motor height adjustment and...

Quick Disconnect Battery TerminalsMotorGuide's Quick Disconnect Battery Terminals allow for quick removal, charging and storage of your boat or vehicle battery. Ideal for battery installs in tight spaces. Fits 4 to 6 gauge wires and is rated for 500 amps continuous, 800 amps surge at 12 volts. Constructed of copper...

6 Gauge Wire Receptacle AdapterMotorGuide's 6 Gauge Wire Receptacle Adapter converts original receptacle to6 gauge wiring. Allows 6 gauge wire connection to MotorGuide medium-duty trollingmotor receptacle Corrosion resistant Plated brass electrical components WARNING: This product can expose you to chemicals which are known to the State of California to cause...

Quick-Release Bracket, Aluminum, BlackThe Quick-Release Bracket provides quick installation and removal ofMotorGuide Xi5 trolling motors as well as competitive electric steer motors.Low profile and small foot print don't take up much space on boat deck. Fullcast aluminum base for ultimate stability. Stainless steel hardwareincluded. Positive locking mechanism provides a rigid...

Bounce Buster KitFor use with X5 and older mountsThe MotorGuide Bounce Buster is designed to prevent trolling motor mount, motor, and boat damage when navigating rough water. Featuring a high-impact plastic tube with a rubber foot, there is a model available to fit any Gator Mount. It attaches using the...