DIN Rail Mounting KitDIN rail mounting kit for use with USG-2.

Engine Management Unit Analog - NMEA2000Share engine information on the NMEA 2000® bus...The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor the engine on a vessel.The EMU-1 has a...

Micro 4-Way Instrument DropThe Actisense 4-way drop makes it easier to reach up to four devices with a single cable.Typically, when four devices need to be connected to an NMEA 2000 backbone, a T-piece and individual cable is required for each one. This can either mean excessive cabling demands or...

N2K Female/Female Gender Changer - 0.25MUse between two cable connectors of the same type and gender. Overcomes the problem of connecting two devices or cables which have the same gender of connector on an NMEA 2000® backbone.Female to Female - 0.25M Specifications: Cable Length (Feet): 1' Connection Gender: Female-Female Box...

N2K Male/Male Gender Changer - 0.25MUse between two cable connectors of the same type and gender. Overcomes the problem of connecting two devices or cables which have the same gender of connector on an NMEA 2000® backbone.Male to Male - 0.25M Specifications: Cable Length (Feet): 1' Connection Gender: Male-Male Data...

NMEA 2000® Rib Starter Kit An expandable solution for smaller boat users that wish to install an NMEA 2000 network.Installing small NMEA 2000 networks is quicker and easier than it’s ever been with this NMEA 2000 Starter Kit (A2K-KIT-3) from Actisense.The equivalent of four T-pieces in a single case provides...

NMEA0183 Data Combiner w/RS232Flexible multiplexing w/preconfigured version for Autoswitching or AIS operation...The Actisense NDC-4 and NDC-4-USB allow up to five OPTO isolated NMEA 0183 sources to be multiplexed into a single stream*.Two flexible ISO-Drive outputs allow two different downstream talker baud rates to be created, ensuring maximum system flexibility.The NDC-4...

NMEA0183 to NMEA2000 AIS ConfiguredHook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices... NGW-1-ISO-AIS is the NMEA 0183 AIS option. This is a pre-configured version of the standard NGW-1-ISO that enables the conversion of NMEA 0183 AIS data to its equivalent in NMEA 2000. This provides an...

NMEA0183 to NMEA2000 w/USBHook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices... NGW-1-USB is the NMEA 0183 chartplotter option. USB (1.1 and 2.0) interface for bi-dircetional connection to a PC.The Actisense NGW-1 NMEA 2000 Gateway is the easiest way to link between a boats old and new...

NMEA0183 to NMEA2000Hook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices... NGW-1-ISO is the standard option. With an opto-isolated input and ISO-Drive output for direct NMEA 0183 device bi-directional connection.The Actisense NGW-1 NMEA 2000 Gateway is the easiest way to link between a boats old and new...

NMEA0183 to SeaTalkNG GatewayHook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices... NGW-1-STNG is the Raymarine SeaTalkNG option. This version enables users to convert NMEA 0183 data into SeaTalk NG and vice-versa, providing seamless integration with Raymarine products. The NGW-1-STNG option combines a standard NGW-1-ISO with a...

NMEA2000 to PC Serial ConnectionInterface your PC to the NMEA 2000 bus with a functional firewall gateway...NGT-1-ISO is a more specialist option - Opto-isolated input and ISO-Drive output for a direct PC bi-directional connection.The Actisense NGT-1 is the only intelligent NMEA 2000 gateway available to precisely transfer messages to and...

NMEA 2000® to PC InterfaceInterface your PC to the NMEA 2000 bus with a functional firewall gateway...NGT-1-USB is the standard option - USB interface for bi-directional connection to a PC.The Actisense NGT-1 is the only intelligent NMEA 2000 gateway available to precisely transfer messages to and from the NMEA 2000...

OPTO-4 Isolated NMEA to RS232 AdapterIsolate an RS232 (PC) port to protect against ground loops...The Actisense OPTO-4 is a bi-directional NMEA 0183 (RS422) to RS232 interface cable which provides a safe method of connecting an NMEA 0183 system to a laptop PC or any device with a standard RS232 9-pin...

PRO-BUF-1 Professional NMEA 0183 BufferAdaptable NMEA 0183 Buffer with two OPTO-isolated inputs and twelve ISO-Drive™ isolated outputs, making ground loops a thing of the past and keeping devices safe from damage.PRO-BUF-1 is reliable, robust and provides isolation on all inputs and outputs as standard. With two NMEA 0183 inputs, twelve...

Protective Screw Cover for N2K Connectors *10-PackScrew-cap covers for the NMEA 2000 Micro connectors, female and male versions available. *Sold in quantities of 10.

Quick Network Block Central ConnectorFault-free, NMEA 2000® backbone connections...The Actisense QNB-1 provides flexible alternatives to multiple connectors reducing the cost of an NMEA 2000 cable installation.QNB-1 is perfectly suited to areas of high instrument density, such as engine bays, as six network drops can be connected.The QNB-1 can limit the...

A2K-SBN-2 Small Boat 8 Way Self-Contained Boat Network N2KInstalling small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Boat Network (SBN) from Actisense.The equivalent of eight T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces...

Small Boat N2K Network KitInstalling compact sized NMEA2000® networks is now quicker and easier with the introduction of the Small Boat Network from Actisense. This "backbone in a box" is the equivalent of four T-pieces, two terminators and a power tap, all molded into a single, compact case. This innovative...