Sea-Dog

Stainless Steel Replacement Flag Pole - 30" The flag is attached to the flagpole using nylon adjustable flagpole clips in conjunction with stainless steel, spring wire, quick release clips which allows mounting flexibility for a variety of flag or pennant sizes.  Maximum speed 10 MPH.WARNING: This product can expose you to...

Nylon Deck Fill Key Deck Fill Key is constructed of injection molded black nylon. For use with all Fill Caps featuring 1-3/16" holes on center. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For...

Boat Hook Combination Soft Bristle Brush & SqueegeeThe Combination Soft Bristle Brush & Squeegee fits all Sea-Dog® Boat Hooks and universal/Acme threaded devices. Soft bristles are scratch resistant for gelcoat, paint, and plastic windows. Constructed of injection molded nylon with a marine grade silicone rubber squeegee. WARNING: This product can...

Flush Mount Rod Holder - Black Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause...

Nylon Adjustable Flagpole Clamps - 1/2" - PairThe flag is attached to the flagpole using sliding, black nylon pennant mounts. Both pennant mounts are adjustable in either direction on the flagpole allowing flexibility in mounting various sizes of flags.WARNING: This product can expose you to chemicals which are known to...

Rail Base Fitting Rectangular Base 30° 316 Stainless Steel - 1-7/8" x 32-3/16" - 1" ODThese Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four...

Rail Mount Adjustable Rod Holder Fits Diameter 1-11/16" - Formed & Cast 316 Stainless SteelThis Rail Mount Rod Holder can accommodate rods up to 1-11/16” in diameter. Features a front mount adjustment screw, allowing easy adjustment without having to disassemble the rail mount brackets. Designed to fit 7/8” to 1”...

MaxBlast Air Horn Compressor - 24VThe MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. Maximum: 20A. 12 or 24VDC. CE compliant.WARNING: This product can expose you to...

Rail Mount Bracket for Flagpole - Round - 7/8"-1"Round Rail Mount Bracket is for use on 7/8" and 1" tubing. Constructed of corrosion resistant UV stabilized injection molded nylon. Installs with two RH fasteners and nuts (included). Accommodates Sea-Dog® Round Flagpoles (328112-1 and 328114-1). Maximum speed 10 MPH. WARNING: This...

Ladder Lock - Chrome BrassThese highly polished Ladder Locks are commonly used with wooden step ladders. Ladder slips into tapered locks and becomes secure as it is lowered in to place. Constructed of cast brass with a chrome plated finish. Installs with eight #10 FH fasteners (not included). WARNING: This...

Flush Mount Flagpole Socket - 25° - 1-1/4" ID - 316 Stainless SteelThe 25° Flush Mount Flagpole Socket accepts flagpoles up to 1-1/4” in diameter. Maximum speed 10 MPH. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three #12 FH fasteners (not included). WARNING: This product can...

Rectangular Motor FlushMolded PVC/Painted Steel Outboard Rectangular Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system, extending the engine’s service life. Easy-to-use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose...

Poly Rail Mount Motor Bracket - BlackInjection Molded PolypropyleneThese Rail Mount Motor Brackets are designed to hold small, 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. Most other polypropylene and wood motor...

Windshield Washer Kit Complete - PlasticThis Windshield Washer Kit comes complete with everything needed for a new installation. Includes tank with pump, wiring harness for the pump motor connection, toggle switch, 15' of clear tubing, hose barb tee, two spray nozzles, and mounting bracket. Tank capacity is 2.5 liters (2.66...

Stainless Steel & Nylon Hinge Adjustable AngleThese Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. Concave Hinges are designed to rail mount on 1” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 180° Adjustable...

10 Key Kill Switch Universal Lanyard This marine emergency cut-off 10 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 10 key 50” lanyard fits Johnson,...

Sonic Mini Compact Horn - Chrome These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point...

Max Blast Twin Mini Compact Horn MaxBlast Twin Mini Compact Horn is constructed of injection molded housing under the stamped 304 stainless steel cover, which protects the the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Mounting bracket can be used as...

Twin Mini Compact Horn Twin Mini Compact Horn features a prewired, sealed sound unit with 304 stainless steel diaphragm and stamped 304 stainless cover. Mounting bracket can be used as a wiring template. A drop-in replacement for many common OEM horns. When installed, horns should point slightly downward to permit water...

Drop-In Hidden Horn V.1 with Grills Drop-In Hidden Horn V.1 with Grills is constructed of powder coated steel and injection molded nylon. Kit includes horn plus one chrome and one white decorative billet snap-in grill. Hole size 1-7/8" x 3-3/8". At 106 decibels and a frequency (Hz) of 440±20A, this horn...