Sea-Dog

Track Rod Holder - 7" Tracks - 4 Rod Clips These Track Rod Holders are designed to hold fishing rods in the toughest conditions. Can be mounted vertically or horizontally in boats and homes. Includes two 7” pre-drilled aluminum tracks and four PVC clips. Mounting screws included.WARNING: This product can expose...

Side Mount Rod Holder - Black Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to 1-3/4” in diameter. Installs with two #10 RH fasteners (not included).WARNING:...

Narrow Gunnel Flush Mount Rod Holder - White These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included).WARNING: This product can expose you to...

Stainless Steel Side Mount Rod Holder Side Mount Rod Holders and mounting brackets are constructed of formed 316 stainless steel with plastic end cap. Accommodates rods up to 1-5/8” in diameter. Installs with four #8 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the...

Flush Mount Rod Holder - Black Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause...

Flush Mount Rod Holder - WhiteFlush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer,...

Stainless Steel 90° Flush Mount Rod Holder A value priced, vertical mount rod holder! This Economy 90° Flush Mount Rod Holder with Cap is constructed of formed 304 stainless steel with a plastic liner, mounting gasket, and integral cap. Features a 90° angle. Accommodates rods up to 1-1/2”. Installs with three...

Stainless Steel Flush Mount Rod Holder with Cap - 30° Flush Mount Rod Holder with Cap is constructed of corrosion resistant formed 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners...

Stainless Steel Side Mount Removable Rod Holder Side Mount Rod Holder slides in and out of mounting plate for a lower profile while not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16”. Installs with four #10 FH fasteners (not...

Mounting Plate for 325190 Rod Holder Mounting Plate only for the 325190 30° removable rod holder.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Flush Mount Rod Holder with Cap - 90° A high quality, vertical mount rod holder! These 90° Flush Mount Rod Holders are constructed of investment cast 316 stainless steel with a plastic liner, integral cap, and mounting gasket. Features a 90° angle. Accommodates rods up to 1-1/2". Installs with...

Stainless Cast Steel Flush Mount Rod Holder with Cap - 30° The unique design of the cast stainless mounting flange allows the use of a gasket to reduce leakage that is common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast...

Stainless Steel Flush Mount Rod Holder - 30° Flush Mount Rod Holders are constructed of corrosion resistant investment cast 316 stainless steel. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the...

Rod Holder Gimbal Mount Fillet Table - 20" Features: Solid one-piece construction for long life and easy maintenance Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage UV stabilized high-density polypropylene construction Medium, 20" wide by 12-5/8" deep, UV stabilized, high-density polypropylene Assembles in minutes, with all...

Rod Holder Gimbal Mount Fillet Table - 30" Features: Solid one-piece construction for long life and easy maintenance Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage UV stabilized high-density polypropylene construction Large, 30" by 12-5/8" deep with towel bar. UV stabilized, high-density polypropylene Assembles in minutes,...

Round Tube Rail Mount Fillet Table - 20" Features: Solid one-piece construction for long life and easy maintenance Mounting system includes: Rail mount adapter, Rail mount clamps (pr), and all assembly hardware UV stabilized high-density polypropylene construction Medium table is 20" wide by 12-5/8" deep Fits round tubing 3/4"-1-1/4" diameter Easily...

Round Tube Rail Mount Fillet Table - 30" Features: Solid one-piece construction for long life and easy maintenance Mounting system includes: Rail mount adapter, Rail mount clamps (pr), and all assembly hardware UV stabilized high-density polypropylene construction Large table is 30" by 12-5/8" deep Fits round tubing 3/4"-1-1/4" diameter Easily accessible...

Square Tube Rail Mount Fillet Table - 20" Features: Solid one-piece construction for long life and easy maintenance Rail mounting system includes the 326599-1 Rail Mount Adapter, the 327197-1 Removable Square Rail Mount Clamps (pair), and all necessary hardware UV stabilized high-density polypropylene construction Medium, 20" wide by 12-5/8" deep Fits...

Square Tube Rail Mount Fillet Table - 30" Features: Solid one-piece construction for long life and easy maintenance Rail mounting system includes the 326599-1 Rail Mount Adapter, the 327197-1 Removable Square Rail Mount Clamps (pair), and all necessary hardware UV stabilized high-density polypropylene construction Large, 30" wide by 12-5/8" deep with...

Fillet Table Only - 20" Features: UV stabilized high-density polypropylene Solid one-piece construction for long life and easy maintenance Medium, 20" wide by 12-5/8" deep Easily accessible knife and pliers holders Knives and pliers not included DOES NOT INCLUDE MOUNTING HARDWARE WARNING: This product can expose you to chemicals which are...