24" Wide Homebrew Tap Stainless Steel Commercial Kegerator
- Regular price
-
$2,049.00
- Regular price
-
List: $2,561.0019.99% off ($512.00) - Sale price
-
$2,049.00
- Unit price
- per
24" Wide Homebrew Tap Stainless Steel Commercial Kegerator allows you to dispense your own home brewed beer from the same type of industrial strength beer dispenser that the pros use. This commercial grade keg beer cooler with stainless steel exterior is durably built to withstand the demands of retail environments like a restaurant or tasting room, but small and portable enough to use at home. It is ETL and ETL Sanitation Listed and NSF Compliant, ensuring that it has met the requirements of widely accepted product safety standards for draft beer dispensers. The HBK1XS-1 includes all the components you need to dispense your own home brewed beer from a ball lock keg, including a polished stainless steel draft tower, a Commercial Grade Double Gauge CO2 Regulator and an aluminum 5 lb CO2 tank with a corrosion resistant glossy red coating - upgrades that represent a $25 value at no additional charge!
- This beer dispenser has a pre-configured direct draw kit that includes everything you need to dispense a home brew ball lock keg
- Stainless steel construction, shock reducing rubber floor mat, foamed-in-place polyurethane insulation and a stainless steel top
- Powerful 1/7 hp compressor provides cooling and fans force cool air the draft beer tower to ensure every beer is cold
- 4" locking casters provide mobility when you want to move it, stability when you don't
- ETL and ETL Sanitation Listed and NSF Compliant for commercial use
-
Includes a brand new 5 lb. Aluminum CO2 Tank with Electric Red Epoxy Finish
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill. -
Includes Commercial Grade Double Gauge CO2 Regulator
This regulator works with any CO2 tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO2 pressure is inside of the keg. The side gauge measures the remaining volume of CO2 in the tank, so you'll know when it's about time to get the tank filled. This regulator features a T-style adjustment valve that can be adjusted by hand, eliminating the need for a screwdriver. -
Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Worm Drive Clamps
This 5 foot length of 5/16" I.D. Blue Air/CO2 Tubing is made of Thermoplastic Vinyl Hose (Super Vinyl). It will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two durable stainless steel worm drive clamps that can be easily installed or removed with a flat head screwdriver. -
Includes Ball Lock Home Brew Keg Tap Complete Set
This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line. -
Includes a 3" Diameter Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel. It comes complete with a stainless steel faucet and 5 feet of 3/16 inch I.D. clear beer tubing. This tower is mounted using the gasket and four screws that are included. - Continuous Cold Air Channeled Through Tower to Ensure Cold Product
- Heavy-Duty Stainless Steel Top
- Built-In Drip Tray with Drain
- Stainless Steel Interior Walls and Ceiling
- Shock Reducing Rubber Floor Mat
- Magnetic Gasket Provides Positive Door Sealing
- Self-Closing Door with Lock
- Refrigeration System Utilizes Ozone Friendly R134a Refrigerant
- CFC-Free Foamed-in-Placed Polyurethane Insulation
- Knockout for Remote CO2 or Nitrogen Tank
- Stainless Steel Finish
- ETL abd ETL Sanitation Listed for Commercial Use
- Maximum Ambient Temperature: 90 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
Dimensions |
|
Height |
40" |
Width |
23.5" |
Depth |
31" |
Weight |
|
Unit Weight |
143 lbs |
Shipping Weight |
187 lbs |
Warranty |
|
Labor |
1 Year |
Parts |
1 Year |
Compressor (Parts Only) |
5 Years |
Key Features |
|
Built-in Capable |
No |
Security Lock |
Yes |
Keg Coupler |
Yes |
Regulator |
Yes |
CO2 Tank |
Yes |
Cleaning Kit |
No |
Outdoor Use |
No |
Commercial Use |
Yes |
Keg Storage Capacities |
|
Full Size / 1/2-Barrel |
Holds 1 |
Pony Size / 1/4-Barrel |
Holds 1 |
1/4-Barrel Slim |
Holds 2 |
1/6-Barrel |
Holds 3 |
5 gal. Ball/Pin Lock Keg |
Holds 3 |
Exterior |
|
Cabinet |
Stainless Steel |
Drip Tray |
Yes |
Guard Rail |
Yes |
Casters |
Yes |
Draft Beer Tower |
|
Number of Faucets |
1 |
Material |
Chrome |
Diameter |
3" |
Door |
|
Color / Material |
Stainless Steel |
Number of Doors |
1 |
Door Handle |
Recessed |
Field Reversible |
No |
Accepts Custom Overlay Panel |
No |
Cooling System |
|
Type |
Compressor |
Defrost System |
Automatic |
Front Ventilation |
No |
Controls |
|
Adjustable Thermostat |
Yes |
Digital |
Yes |
Electrical |
|
Electrical Requirements |
115V / 60HZ |
Running Amps |
1.8 A |
Downloads
Need More Help?
Our expert can help guide you through
your purchase.
or send us an email
24" Wide Homebrew Tap Stainless Steel Commercial Kegerator allows you to dispense your own home brewed beer from the same type of industrial strength beer dispenser that the pros use. This commercial grade keg beer cooler with stainless steel exterior is durably built to withstand the demands of retail environments like a restaurant or tasting room, but small and portable enough to use at home. It is ETL and ETL Sanitation Listed and NSF Compliant, ensuring that it has met the requirements of widely accepted product safety standards for draft beer dispensers. The HBK1XS-1 includes all the components you need to dispense your own home brewed beer from a ball lock keg, including a polished stainless steel draft tower, a Commercial Grade Double Gauge CO2 Regulator and an aluminum 5 lb CO2 tank with a corrosion resistant glossy red coating - upgrades that represent a $25 value at no additional charge!
Need More Help?
Our expert can help guide you through
your purchase.
or send us an email
About the Manufacturer
Manufacturer's Name Kegco
Kegco beer dispensing and refrigeration products are the flagship brand of Cydea, Inc. who continue to be leading innovators in the beer dispensing and refrigeration industry. Their quality products are built to last for years of use for the draft beer enthusiast at heart. From opening to storing, Kegco products are well thought out and quality tested to ensure the best experience for the end user. Our core focus is to produce solid products that are practical, functional and visually appealing all while creating a strong bond with our customers. Backed by top notch customer service, Kegco is available to prospective and current owners before, during and after their purchase.