VETUS

O-Ring D 48 x 3mm NBR 70 ShoreO-Ring for Vetus mufflers, waterlocks and gas/water separators.Specifications:Dimensions: 48mm x 3mmFits: NLP40, NLPH40, NLPG40, WLOCK40R, LSS40A and LGS4038 NLP45, NLPH45, NLPG45, WLOCK45R, LSS45A and LGS4538 NLP50, NLPH50, NLPG50, WLOCK50R, LSS50A and LGS5038

Rotating Hose Connection for LP, LSS & NLP - 40mmReplacement rotating Inlet hose port for VETUS LP40, LSS40 and NLP40 Waterlock Mufflers. Supplied complete with O Rings.

V-RingV-Ring for BOW125D

Shear-Pin Set for Vetus BOW5512/24A - 5-PackReplacement Shear-pin Set (5 pieces) for Vetus BOW5512/24A series with solid tunnel flange and two hex bolt motor attachment.Dimensions25.6mm x 4mm

V-Ring V30-A RubberFeatures: V30-A Rubber V-Ring

Spare Zinc Anode Set f/Bow ThrusterSpare set zinc anode for 125/130/160 kgf bow thrusters. Fitted to propeller hub center. Supplied complete with cap head allen screw. Specifications: Material: Zinc Box Dimensions: 2"H x 4"W x 5"L WT: 0.95 lbs UPC: 8717372277542

Bow & Stern Thruster Easy Docking Panel - 12/24VThis control panel combines the functions of twin joysticks into one easy to operate knob. The simple and intuitive control action ensures that operation of both bow and stern thruster together becomes a smooth procedure. The use of Hall effect sensors in...

Zinc Anode Set f/Bow Thrusters - 75/80/95 kgf Bow ThrustersSpare set zinc anode for 60/75/80/95 kgf bow thrusters. Supplied with two stainless steel Allen head countersunk set screws. Specifications: Material: Zinc Box Dimensions: 1"H x 4"W x 6"L WT: 1 lbs UPC: 8717372277535

Drainplug for Waterlock ACC TankThe DRAIN is the plug that closes the drainhole on waterlocks and accumulator tanks.

Drive Pin Set for Vetus Bow 35 & 55kgf - 5-PackReplacement Drive Pin (5 pieces) for the Vetus Bow 35 and 55kgf Thrusters (5X45,5Mm).

Rotating Inlet Set for NLP & LSG - 75mmReplacement rotating hose port, including Clamp Ring assembly and Seal for the Vetus NLP75, LSG75, LGS75, NLP375 and NLPH75.

O-Ring Set for Waterfilter 1320 - 5-PackThis set contains the O-ring (5x) for the FTR1320 Waterfilter

Rotating Hose Connection for LP, LSS & NLP - 50mmReplacement rotating Inlet hose port for VETUS LP40, LSS40 and NLP40 Waterlock Mufflers. Supplied complete with O Rings.

Neutral Button Kit for SICO & SISCOFeatures: Neutral Button Kit Specifically for VETUS SICO and SISCO

Bow Thruster - 45 kgf - 12VFeatures: A single propeller creates less flow disturbance in the tunnel Unique propeller blade design minimizes cavitation noise Spiral gears minimize transmission noise Flexible coupling between tail piece and motor eliminates vibration Streamlined tail piece for optimal flow Strong synthetic propeller eliminates corrosion and...

Bow Thruster Extension Cable - 20'Connection cable 20' for use with Vetus thruster control panels. Quick Guide (pdf)

G.R.P. TunnelHigh quality tunnel for VETUS bow thrusters, made from glass fiber reinforced polyester. Internal diameter 110 mm, length 750 mm.Specifications: Internal Tunnel/Diameter (inches): 4-11/32" External Tunnel/Diameter (inches): 4-3/4" Length (inches): 30" Material: Glass fiber reinforced polyester This product may not be returned to the original point of purchase. Please...

Set: Strainer FTR1320This set contains the 2 halves of the strainer for the FTR1320 waterstrainer.

Set of Shear-Pins for Bow Thruster 80kgf - 5-PackReplacement inboard sheer pin (Safety pin) set (5 pieces) for the Vetus BOW80. Material: Brass Dimensions: 4 x 39.5mm

Propeller for BOW125/130/160Propeller 6 blade, diameter 246mm, for 125/130/160 kgf bow thrusters. Set includes all mounting hardware for propeller. nWorking in close collaboration with the Maritime Institute Netherlands (MARIN), the world-famous hydrodynamic laboratory, VETUS has optimized the performance of its thrusters. This has been achieved by utilizing a unique propeller...