7m Depth Transducer Extension CableSpare 150kHz depth transducer with 7 meter cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Extension Box Dimensions: 1"H x 4"W x 9"L WT: 0.5 lbs UPC: 610696095213

The AIS Engine 3 is supplied with a free copy of `SeaClear' and a trial version of Software on Board. A data cable to connect to the 9 pin serial port of a PC and a 12 volt power cable The AIS Engine 3 and a conventional marine antenna are...

AIS Plotter/Radar - Requires GPS Input & VHF AntennaThe Nasa Marine AIS SART Plotter is the first stand alone AIS receiver / plotter specifically designed for the leisure boat market.The unit consists of a dual frequency AIS receiver, demodulator, signal processor and a backlit matrix display. It receives an NMEA...

This connects directly to the master wind unit. As well as repeating the wind speed it shows wind direction in high resolution when sailing close to - or running with the wind. Complete with 5M cable. Technical Specifications: Consumption, 10mA+ (25mA for display illumination max) 7 levels of display backlighting...

The Clipper Compass Repeater has all the features of the master unit and an independent off course alarm.Steer to course functionWhen the steering function is selected a series of chevrons accumulate showing the magnitude and direction of the steering error. To stay on course simply turn the wheel in the...

The Clipper Compass is a fully electronic compass with remote fluxgate sensor. The large clear display has 7 levels of illumination and gives True or magnetic heading. The sensor which is gimballed for plus/minus 45 degrees of pitch and roll, is mounted in a position where stray magnetic fields are...

Cradle Mount BracketOptional cradle mount bracket for Clipper MOBi, Navtex, MeteoMan and AIS Radar display units.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief....

If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief....

Best selling combined Speed/Distance Log and Echo Sounder in standard 110mm square size. Suitable for open cockpit mounting. Technical Specifications: Depth Sounder in feet and meters Shallow alarm and keel offset Complete with well proven Transducers Speed in MPH, Knots and Km/H Trip and Total Distance in Miles, Nautical Miles,...

NEW - The Log without a paddlewheel and no moving partsThe Clipper EASYLOG shows speed, trip and total distance on a high visibility liquid crystal display. It utilises the RMC sentence from any GPS or plotter with an NMEA 0183 output. Alternatively the EASYLOG can repeat, using sentences VHW and...

Easy NavtexEasy to read. This new navtex receiver features big, bold characters and intuitive message formatting.Easy to program. Simple menus let you select which stations and which message categories you want to receive.Easy on your battery. Its low power consumption and power saver mode on the backlight ensure minimum current...

EX-1 Exhaust Temperature Monitor/AlarmThe EX-1 continually displays the exhaust gas temperature in wet exhaust systems giving advanced warning of potential problems. The EX-1 measures the exhaust gas temperature directly and displays it in degrees centigrade or Fahrenheit. Once the normal working temperature has been established a maximum temperature, a few...

The Clipper GPS repeater has quickly established itself as the market leader in cockpit GPS repeaters. Typical of the Clipper range it boats large clear digits and simple operation. Installation coundn't be simpler with just two wing nuts to fasten the unit into the panel ans two wires to connect...

Complete kit for mounting depth transducer inside GRP hull.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Misc Box Dimensions: 3"H x 4"W x 8"L WT: 0.65 lbs UPC: 610696095176

Instrument Pod for 2 Clipper InstrumentsCLZ-PODRobust POD moulding to suit 2 x Clipper Cockpit display units. Suitable for open cockpit mounting.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Protect your Clipper instrument from the elements with this spare weather cover.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MeteoMan BarometerThe rate of change of barometric pressure and history of wind speed can be an invaluable indicator of imminent conditions.Many sailors rely on low cost domestic barometers, which are inaccurate, have low resolution and very poor history. Several quality paper recording instruments exist but are delicate, fiddly to use...

Clipper NMEA 2000 Compliant Wind SystemThe Wind System consists of the version 2 mast head sensor and a small translator box, the box is fitted with a ‘micro-c’ connector which plugs directly into an existing NMEA 2000 network.NMEA 2000 Compliant Wind system is supplied complete with masthead unit, 20 meters...

NMEA Compass Sensor Compact and waterproof NMEA compass sensor transmits NMEA 0183 sentence HDG to Clipper, Target and Cruiser or other equipment. Complete with 10 meters of cable Accuracy +/- 2 degrees Gimballed to +/- 30 degrees Output frequency 1Hz Outputs NMEA 0183 sentence HDG 12V supply Dimensions 72mm x...