Autopilots

  Accu-Steer HRP05-12 Hydraulic Reversing Pump Unit - 12 VDC [HRP05-12] The Accu-Steer HRP Series pump sets are designed to interface hydraulic steering systems with autopilot and electric steering controls. The output flow from the pump set determines the speed of the rudder. These three pumps interface with most autopilots....

  Accu-Steer HRP05-24 Hydraulic Reversing Pump Unit - 24 VDC [HRP05-24] The Accu-Steer HRP Series pump sets are designed to interface hydraulic steering systems with autopilot and electric steering controls. The output flow from the pump set determines the speed of the rudder. These three pumps interface with most autopilots....

Accu-Steer KVR-3 Verado Kit w/3' Hoses [KVR-3]3' Hoses & Fittings for Furuno & Accu-Steer HRP 11/17 Specifications: Type: Fittings & Hoses Box Dimensions: 6"H x 11"W x 11"L WT: 3.25 lbs

B&G H5000 Pilot Computer [000-11554-001]H5000 Pilot Computer: The record-breaking B&G Pilot features dedicated steering modes and sailing algorithms including Gust Response, Recovery and High Wind Response. It's been proven in the toughest conditions and most testing environments and is ideal for short-handed cruisers or racers.The record-breaking B&G Pilot has been...

B&G H5000 Pilot Controller [000-11544-001]Enjoy straightforward autopilot access, control and system setup of B&G's powerful H5000 Pilot from the dedicated keypad of this Pilot Controller unit. As the primary Pilot controller, or as a second station to a Zeus chartplotter, the Pilot Controller provides assured control and feedback via a...

  B&G Hydraulic Ram T2 - 12V [RAM-T2-12V] B&G's 12V Hydraulic T2 Autopilot Ram Specifications: Type: Pumps/Drives Box Dimensions: 6"H x 11"W x 31"L WT: 22.3 lbs UPC: 738087005426

BG Hydraulic Ram to 12V [000-13902-001] High power, efficient drive units for maximum power with minimum consumption. Ram drives allow the Power Steer mode on the Pilot to be used in cases of manual steering failure Fully Integrated (T0, T1 and T2 units) hydraulic system, no external hoses, reservoirs etc....

BG Hydraulic Ram Type 1 - 12V [RAM-T1-12V] High power, efficient drive units for maximum power with minimum consumption Ram allows the Power Steer Mode on the Pilot to be used in case of manual steering failure Integrated hydraulic system: no external hoses, reservoirs, etc... Specifications: Type: Pumps/Drives Box Dimensions:...

BG Triton2 Autopilot Controller [000-13296-001]This intuitive keypad can be combined with a B&G Triton² Display to create a fully-featured autopilot controller, including B&G's Intelligent Sail Steering functionality and Smart Manoeuvre controls.OverviewThis intuitive keypad can be combined with the Triton² Instrument display to create a fully-featured autopilot controller. Benefit from B&G's...

BG Triton2 Pilot Controller  Triton2 Digital Display Pack [000-13561-001] Triton² Display The full-color Triton² Display provides sailors with a clear visual representation of key instrument data including Speed, Depth, Wind, Heading, AIS targets, GPS data and more. An Optically Bonded display means absolutely zero condensation or fogging, while transflective LCD...

1001 Autopilot with Magnetic Compass Sensor & Rotarty FeedbackAdvanced Technology for Accurate Steering Simple to OperateFeatures: Fixed station autopilot Suitable for mid-sized vessels, in the range of 30 to 60 feet / 10 to 20 meters Three "Turn" functions, Continuous, Emergency and "U" Turns Compatible with most standard types of...

101 Remote ControlThis remote control has standyby power, power steer, pilot and nav modes plus dodge and U-turn functions. Specifications: Type: Parts Box Dimensions: 7"H x 8"W x 8"L WT: 2 lbs Quick Guide (pdf)

1420 AutopilotSimple to OperateFeatures: Clip mounted allowing both fixed and hand held operation Suitable for small to mid-sized vessels Capable of operating on most standard types of steering systems Waterproof Control Head Automatic yaw, sea state and trim Output for optional analog rudder angle indicator, up to 4 stations Easy...

1420 Second Station Kit - Includes Install KitFeatures: Clip mounted allowing both fixed or hand held operation Suitable for small to mid-sized vessels Capable of operating on most standard types of steering systems Waterproof Control Head "Hands Off" automatic yaw, sea state and trim Optional full function remote Output for...

201 Remote Control with 40' CableThis remote control has 3 modes: Standby, Tiller & Pilot Specifications: Type: Parts Box Dimensions: 4"H x 7"W x 7"L WT: 2.3 lbs Quick Guide (pdf)

Commander P2 AutopilotEngineered for PerformanceFeatures: Auto Learning using Intelligent Steering Technology - IST Auto Setup - automatic drive detection, automatic pilot calibration & automatic compass compensation Auto Sea State adjustment for reliability in all weather conditions Sunlight Viewable TFT LCD or silver backed high contrast monochrome LCD Work Mode -...

Commander P2 Color Pack w/Fluxgate Compass & Rotary Feedback (Without Pump)Engineered for Performance Features: Auto Learning using Intelligent Steering Technology — IST Auto Setup — automatic drive detection, automatic pilot calibration & automatic compass compensation Auto Sea State adjustment for reliability in all weather conditions Sunlight Viewable TFT LCD or silver...

CT2 Drive BoxComNav CT2 Drive Box are specifically designed to connect Comnav 1001, 1101, 1201, and 2001 autopilots to steering systems using reversing DC Motor Pump sets, Linear actuators or DC Motor Mechanical Drive Units. The CT2 Drive Box features dynamic braking, current limiting and thermal protection of the MOFSET...

Fluxgate CompassSpecifically designed for ComNav Autopilots, the ComNav Fluxgate Compass senses the earth's magnetic field directly. A heeling adjust control is provided to reduce or eliminate the effect of the vessel's vertical field.Features:: Microprocessor controlled Temperature range -15 degrees Celsius to +85 degrees Celsius Power supplied by ComNav autopilot Watertight...

Jog SwitchThe ComNav Jog Switch is a permanently mounted, watertight eletrical switch specifically designed for marine service. The spring-centered lever is moved to Port or Starboard as desired to provide non follow-up (time dependent) electrical control of the vessel steering system. The Jog Switch can work in conjunction with any...