-
Vendor: Weld MountWeld Mount Industrial Kit - No Adhesive [7008]Industrial Kit - No AdhesiveThis Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. A Wide Selection Of Weld Mount Parts Are Supplied In A Heavy "Durham" Metal Box Which Is A Standard Rack Mounted System. The Weld...
- Regular price
- $389.99
- Regular price
-
- Sale price
- $389.99
- Unit price
- per
-
Vendor: Weld MountWeld Mount .75" Tall Stainless Standoff Through Thread w/5/16" x 8 Threads - Qty. 6 [51618122].75" Tall Stainless Standoff w/5/16" x 8 Threads - Through-ThreadUnlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These...
- Regular price
- $70.99
- Regular price
-
- Sale price
- $70.99
- Unit price
- per
-
Vendor: Sea-DogSea-Dog Add-A-Snap - White - 4" [299204W-1]Add-A-Snap - White - 4" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth...
- Regular price
- $6.25
- Regular price
-
- Sale price
- $6.25
- Unit price
- per
-
Vendor: Weld MountWeld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 50 [805950]White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop...
- Regular price
- $39.99
- Regular price
-
- Sale price
- $39.99
- Unit price
- per
-
Vendor: RapalaRapala Angler's Pliers - 8-1/2" [SACP8]Angler's Pliers - 8-1/2"Made of durable carbon steel with a nickel plated finish with coastal colored co-molded grips for comfort with a double leaf spring for ease of use and convenience. Split shot crimper, Rapala lure tuning tool and light duty side cutters are also featured.Also available in 12 piece...
- Regular price
- $14.49
- Regular price
-
- Sale price
- $14.49
- Unit price
- per
-
Vendor: RapalaRapala Angler's Pliers - 6-1/2" [SACP6]Angler's Pliers - 6-1/2"Made of durable carbon steel with a nickel plated finish with coastal colored co-molded grips for comfort with a double leaf spring for ease of use and convenience. Split shot crimper, Rapala lure tuning tool and light duty side cutters are also featured.Also available in 12 piece...
- Regular price
- $12.49
- Regular price
-
- Sale price
- $12.49
- Unit price
- per
-
Vendor: Weld MountWeld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 100 [805900]White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop...
- Regular price
- $64.96
- Regular price
-
- Sale price
- $64.96
- Unit price
- per
-
Vendor: RapalaRapala Folding Fillet Board - 12" x 23" [FSB1223]Folding Fillet Board - 12" x 23"Closed Dimensions: 12" x 12"Simple in design, brilliant in function, the Folding Fillet Board folds for compact storage and transport, then opens for a USDA & FDA approved cutting surface for filleting, slicing and dicing. A perfect choice for fishing, hunting, the kitchen and...
- Regular price
- $31.49
- Regular price
-
- Sale price
- $31.49
- Unit price
- per
-
Vendor: Weld MountWeld Mount Stainless Steel Stud 1.25" Base 1/4 x 20 Threads 2.25" Tall - 10 Pieces [142036]Stainless Steel Stud 1.25" Base 1/4 x 20 Threads 2.25" Tall - 10 PiecesThe stainless steel stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs in shear. All studs have 1/4 x 20 threads. Use...
- Regular price
- $56.99
- Regular price
-
- Sale price
- $56.99
- Unit price
- per
-
Vendor: Weld MountWeld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 30 [805]White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop...
- Regular price
- $21.40
- Regular price
-
- Sale price
- $21.40
- Unit price
- per
-
Vendor: Weld MountWeld Mount Double Poly Clamp f/1/4" x 20 Studs - 5/8" OD - Requires 1.5" Stud - Qty. 25 [80625]Double ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.Features: Hose OD: 0.625" Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89" Recommended Clamp...
- Regular price
- $61.11
- Regular price
-
- Sale price
- $61.11
- Unit price
- per
-
Vendor: Weld MountWeld Mount Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75 Tall - 6-Pack [142012304]Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75" Tall - 6-PackUnlike the SOB standoffs which have a blind thread, the SOT series standoffshave a thread which runs all the way through the barrel of the standoff.This allows the standoff to be mounted from either side of the base....
- Regular price
- $63.99
- Regular price
-
- Sale price
- $63.99
- Unit price
- per
-
Vendor: Weld MountWeld Mount AT-7 Aluminum Base Swivel Tie Mount - Qty. 100 [807100]Aluminum Base Wire Tie MountThis tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for a #5 wire tie and has...
- Regular price
- $299.99
- Regular price
-
- Sale price
- $299.99
- Unit price
- per
-
Vendor: Weld MountWeld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 500 [803500B]AT-3B Small Black Nylon Wire Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs....
- Regular price
- $248.89
- Regular price
-
- Sale price
- $248.89
- Unit price
- per
-
Vendor: Weld MountWeld Mount 2.25" Tall Stainless Stud w/#10 x 24 Threads - Qty. 10 [102436]2.25" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from...
- Regular price
- $49.99
- Regular price
-
- Sale price
- $49.99
- Unit price
- per
-
Vendor: Weld MountWeld Mount Stainless Nut Plate w/#10 x 24 Threads - Qty. 10 [901024]Floating Nut PlatesOur floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesive. The fixture keeps the threads clean during bonding. Remove the rubber fixture when you are ready to make...
- Regular price
- $71.99
- Regular price
-
- Sale price
- $71.99
- Unit price
- per
-
Vendor: Weld MountWeld Mount Manual Dual Pusher Rod f/AT-2010 & AT-4020 - Qty. 10 [805002]Dual Pusher RodThe AT-500 dual pusher rod is used to dispense equal amounts of our AT-2010 or AT-4020 adhesive for manual mixing. This dual pusher rod can not be used with our AT-300 or AT-350 mixing tips as it does not generate enough force to push the adhesives through the...
- Regular price
- $23.64
- Regular price
-
- Sale price
- $23.64
- Unit price
- per
-
Vendor: Weld MountWeld Mount Double Poly Clamp f/1/4" x 20 Studs - 3/8" OD - Requires 1" Stud - Qty. 25 [80375]Double ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.Features: Hose OD: 0.375" Stud Required: ST125-1420-16SS Clamp Dimensions L/W/D: 1.54" x 0.63" x 0.56" Recommended Clamp...
- Regular price
- $41.36
- Regular price
-
- Sale price
- $41.36
- Unit price
- per
-
Vendor: Weld MountWeld Mount Double Poly Clamp f/1/4" x 20 Studs - 1" OD - Requires 1.75" Stud - Qty. 25 [801000]Double ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.Features: Hose OD: 1" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp...
- Regular price
- $81.48
- Regular price
-
- Sale price
- $81.48
- Unit price
- per
-
Vendor: Weld MountWeld Mount AT-13 - 10:1 Gun Plunger f/AT-6030 Adhesive - 10-Pack [801310]10:1 Gun Plunger for AT-6030 Adhesive10 Pack Gun Plunger for AT-6030 Adhesive
- Regular price
- $102.04
- Regular price
-
- Sale price
- $102.04
- Unit price
- per
Flexible Payment Options
Pay in full or carry a balance.
Fast & Free Shipping
Free delivery on thousands of items.
Affordable and Effective Plans
Save time when you add these services in Cart.
Support - Available Daily
Need help with an order or return?