Over $100

Euro-Style Rocker Switch ControlThis control is ergonomically designed, water resistant and provides a positive "click" when the trim tabs are engaged. Its lockout feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into any existing Bennett 2 1/2-inch Rocker...

Euro-Style Rocker Switch ControlThis control is ergonomically designed, water resistant and provides a positive "click" when the trim tabs are engaged. Its lockout feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into any existing Bennett 2 1/2-inch Rocker...

Actuator Assembly - 13.75" Closed LengthActuator assembly is complete hydraulic cylinder. Piston-like strong arm that pushes tab into position. Sophisticated plastic resin body. Nylon upper hinge. Bends 5° in actual use. Fluid flows through concealed hole in upper hinge thus eliminating external hoses subject to damage. Hearty and flexible enough...

Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position. Fluid flows through a concealed hole in the upper hinge at the top of the actuator - thus eliminating external hoses subject to damage.A1200S is designed for installations where space is limited. WARNING: This...

Auto Tab RetractorAutomatically retracts tabs when boat?s ignition is turned off. Trailered or dry storage boats have added defense from trim tab damage with them "full-up" during hauling, trailering and storage. Ensures trim tabs are all the way up every time boat is started if boat is not equipped with...

Hydraulic Power UnitA compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs...

B260 Bronze Broadband Thru-Hull Transducer with Temp, Built-in Diplexer and Hi-Speed Fairing Block, 1kW (10-Pin)526T-HDD Bronze Thru-Hull Transducer with Broadband Technology 1,000 Watts Power 50/200 kHz with Diplexer 20/6 degree Beam Angles Bronze Thru-Hull with Temperature 10-Pin Connector Ships with High-Speed Fairing Block, # AIR-033-391 WARNING: This product can expose...

SG10 Pedestal Guard SG10 StraightGuard has no bends and is designed to fit a single InstrumentPod. 1” diameter stainless steel tubes. No feet included on 1″ StraightGuards.Features: 316 grade stainless steel 065 gauge wall thickness Mirror polished finish All 1.25” include stainless steel feet (1” does not include feet) This...

HST-DFSBLTransom-mount, dual frequency skimmer with built-in temperature sensor.Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-335C DF, LMS-337C DF, LMS-339C DF iGPS, LMS-480, X105C DF, X107C DF, X126DF, X136DF, X59DF Specifications: Chirp: No Mounting Style: Transom Imagining: Standard Cable Length (Feet): 20' Temperature: Yes Speed Included: No Pins:...

Compatible with the following: ST40 Instruments Compatible hull material: Aluminum and fiberglassCable: 30ft (10m) CableHole Diameter for installation: 2"Depth Only Specifications: Cable Length (Feet): 30' Temperature: No Speed Included: No Mounting Style: Thru-Hull Chirp: No Box Dimensions: 4"H x 6"W x 6"L WT: 1.15 lbs UPC: 723193260098

ST300 Thru-hull Shorty™The S300/ST300 speed sensors are our lowest cost and shortest thru-hull speed sensors. As part of our Shorty™ Series, they are designed for boats with low headroom. The plastic P371 low profile outer housing option is nearly flush and minimizes drag with only 5 mm (3/16") extending outside...

SI-TEX 492/50/200 In-Hull Transducer f/ES502 Dual Frequency 50/200 kHz Max Power: 500W Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz Housing: Plastic Mount: In-Hull Plug: 8 pin Cable: 30' Temp: No Speed: No For SI-TEX model: ES502 Specifications: Temperature: No Cable Length (Feet): 30' Mounting Style:...

SI-TEX 496/50/200ST Bronze Thru-Hull Transducer w/ Fairing Block f/ ES502 Dual Frequency 50/200 kHz Max Power: 500W Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz Housing: Bronze Mount: Through Hull Plug: 8 pin Cable: 30' Temp: Yes Speed: Yes For SI-TEX model: ES502 Specifications: Temperature: Yes...

Bronze Broadband Thru-Hull with Temp and Hi-Speed Fairing Block, 1kW (No Plug)526TID-HDN Thru-Hull Transducer with Broadband Technology 1 kW 50/200 kHz, no Diplexer 20/6 degree Beam Angles Bronze Thru-Hull with Temperature 10 Meter Cable No connector provided Ships with High-Speed Fairing Block, # AIR-033-391 B260 MB1100 required for some applications...

235DST-MSE Bronze Thru-Hull, Digital Depth, Speed & Temp Sensor - 7-PinFeatures: 200 Watts 235 kHz Bronze Thru-Hull Depth, Speed and Temperature (+/- 1°) 10-Meter Cable with 7-Pin Connector Can be flush mounted on a hull with up to a 22° dead rise WARNING: This product can expose you to chemicals...

Shoot-Thru-Hull, wide cone angle, 200 kHz "POD" transducer with external temperature sensor. Specifications: Cable Length (Feet): 20' Temperature: Yes Speed Included: No Pins: 7 Mounting Style: In-Hull Imagining: Standard Chirp: No Box Dimensions: 4"H x 5"W x 10"L WT: 1.5 lbs UPC: 042194524214

B60 Tilted Element™ 20°20° titled version is designed for 16° - 24° deadrise anglesFor use with Raymarine DSM250/DSM300/DSM300G/DSM30/CP300The bronze B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more...

B60 Tilted Element™ 12°12° titled version is designed for 8° - 15° deadrise anglesFor use with Raymarine DSM250/DSM300/DSM300G/DSM30/CP300The bronze B60-12° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more...

B60 Tilted Element™ 20° Furuno 10 pin connector20° titled version is designed for 16° - 24° deadrise anglesThe bronze B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more...

B60 Tilted Element™ 12°12° titled version is designed for 8° - 15° deadrise anglesThe bronze B60-12° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The...