Octopus Autopilot Drives

Hydraulic Steering Fluid - QuartFeatures: Applications: All Hydraulic Steering Systems Type: ISO 15 Low Temp Mineral Hydraulic Fluid Select Container Size: Quart

Seal Kit for Reversing PumpReversing pump seal kit

Type T - Straight shaft tilt version for mounting behind the dash with a steering wheel tilt facilityThis drive unit replaces a manual Tilt drive and is mounted directly behind the dash, but still allows the angle of the steering wheel to be changed. It uses the front end from...

Autopilot Pump Type 3 Adjustable Reversing 12V Up to 30CI CylinderFeatures: RELIABLE - Piston pump technology with only three moving parts TWIC THE POWER - Delivers over twice the hydraulic output per watt of input HALF THE POWER CONSUMPTION - Accurate ram positioning means fewer course corrections ADJUSTABLE FLOW RATE -...

Autopilot Pump Type 2 - Adjustable Reversing Pump - 12V up to 18 CI CylinderNow with ORB Port Connection manifoldReversing pumps are used when hydraulic steering is fitted on boats up to 65 feet L.O.A. (depending on rudder torque). The pumps are switched on by the automatic pilot and make...

Steering Cable Adapter KitOC15SUK07f/TFX SSC72 - Uflex M47 - Morse 304415 Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.3 lbs UPC: 628309133627

Steering Cable Adapter KitOC15SUK08f/ TFX SSC62 - Uflex M66 Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.4 lbs UPC: 628309133634

Autopilot Pump Type 1 Adjustable Reversing 12V Up To 15 CI CylinderTWICE THE POWERThe unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump.HALF THE POWER CONSUMPTIONGear pumps leak oil between the gears, while a piston (such as used in...

Integrated Rudder Feedback UnitsOC15SUK27BTypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.The...

Reversing Pump 1200CC/min - 12V - Up to 22ci CylinderAdjustable displacement Reversing Pump with Bypass Valve & Reservoir  Specifications: Type: Pumps/Drives Box Dimensions: 6"H x 7"W x 15"L WT: 10.4 lbs UPC: 628309134761

38mm Bore Cylinder Seal KitOctopus autopilot drives 38mm bore cylinder seal kit. Octopus offers a selection of autopilot drive systems that are engineered to deliver unparalleled performance and years of reliable service on a wide range of vessels. Whatever your auto steering needs, from fishing boats and sailboats to yachts...

Linear ActuatorsOCTAF1012LAR7An Octopus Hydraulic Linear Actuator is a simple, effective way to drive the rudder on a boat equipped with a mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. This assembly is mounted on the rudder tiller-arm or quadrant....

Hydraulic Gear Pump 12V 6-9CI CylinderFrom the design team that brought you the legendary Octopus hydraulic drives, our new gear pump offers industry leading reliability and performance in a smaller, lighter, quieter package.Features: Industry leading efficiency - lower power consumption, particularly under demanding conditions requiring higher flow rates equates to...

Unbalanced Valve KitOC17SUK03 Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.5 lbs UPC: 628309134075

Integrated Rudder Feedback UnitsOC15SUK27ETypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.The...

Type S - Standard Straight Shaft f/Mounting Behind the DashThe Straight shaft drive unit replaces the manual drive used on cable steered boats and is mounted directly behind the dash. The drive is directly compatible with the Morse 290 steering helm but comes with its own bezel kit and can...

Linear ActuatorsOCTAF1012LAM7An Octopus Hydraulic Linear Actuator is a simple, effective way to drive the rudder on a boat equipped with a mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. This assembly is mounted on the rudder tiller-arm or quadrant....

Type R - Stand Alone RemoteLOW COST SOLUTION - No need to change to hydraulic steering EASY TO FIT - Simple to install kits DISCREET INSTALLATION - All components mounted out of sight TIME SAVING - Rudder feedback option mounts directly on drive SAFE - Manual override without disengaging the...

Integrated Rudder Feedback UnitsOC15SUK27DTypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.The...

Sterndrive System f/Mercruiser from 1994 & North American Volvofrom 1997 w/9' CableThe heart of this pilot drive system is the remote drive. The drive unit is connected to the boat steering by a cable and connection kit.The remote drive system is ideal for the following three types of engine application:...