Marine Navigation & Instruments - Transducers

XNT-9-HW-MSI-150-T MEGA SI/DI Dual Spectrum CHIRP Transducer with Temp f/HELIX® 7/8 MEGA SI Transom Mount, MEGA Down Imaging, 455 kHz and 1.2 MHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature. Compatible with: HELIX 7 CHIRP MEGA SI GPS G3/G4, HELIX 7 CHIRP MEGA...

XNT-14-HW-T Dual Spectrum CHIRP TM Transducer with Temp for SOLIX™Transom Mount Dual Spectrum CHIRP Transducer supports Dual Spectrum CHIRP 2D Sonar with high frequency beam and wide cone angle, offering CHIRP range of 150-220kHz and max depth of 1200ft. Includes built-in temperature sensor, all metal bracket and 20’ cable. Features: This...

Opportunity for up to $4,600 in Savings w/Qualifying Furuno Purchases UNTIL 12/31/2024 VIEWSide Scan Transom Mount for TZT3The 225T-TM904 is a Transom Mount transducer that works with the built-in CHIRP Side-Scan functionality on your NavNet TZtouch3 TZT12F, TZT16F, or TZT19F MFD.Features: 150 watts on each side CHIRP 220-240kHz Transom Mount...

SplitShot Skimmer Transom Mount TransducerSplitShot 2-in-1 Sonar with High CHIRP and DownScan Imaging™SplitShot 2-in-1 sonar makes it easier to stay on the fish, delivering the best traditional sonar views and lifelike images of fish-holding structure beneath and beside your boat. Specifications: Mounting Style: Transom Imagining: Standard/Down Chirp: High Wide Speed...

B164 1kW Tilted Element 20° - 8-PinGarmin's bronze, thru-hull mount transducer with 20° tilt provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 16-24° deadrise angle.WARNING: This product can expose you to chemicals which are known to the State...

B275LH-W Bronze Thru-Hull Transducer - 12-PinGet more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution....

GT36-TM & GT8HW-IH Transducer BundlePerfect for the coastal and offshore fisherman who wants CHIRP traditional sonar and CHIRP ClearVü and CHIRP SideVü scanning sonar, these bundles consistently display clear and crisp fish arches with superior target separation as well as clear definition of objects, structure, and fish that pass below...

GT8HW-IH In-Hull Transducer - 8-PinGT8HW-IH transducer is ideal for bass boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It requires a flat section in the hull to be mounted and is excellent for boats traveling at high...

XNT 9 DI T Transom Mount TransducerPart #: 710226-1Features: Down Imaging/DualBeam Plus 75 degrees/ 45 degrees 455/800 kHz (DI) 25 degrees/16 degrees 200/455 kHz with built-in temperature 20' Cable WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer,...

XP 9 HW In-Hull TransducerIn-Hull Dual Spectrum CHIRP Transducer supports Dual Spectrum CHIRP 2D Sonar with high frequency beam and wide cone angle, offering CHIRP range of 150-220kHz and max depth of 1200ft. Intended for glue-in installation inside single layer fiberglass hulls. Includes epoxy kit and 20’ cable. Features: This accessory...

GT15M-THF 12 Degree 600W SS Thru-Hull TransducerDesigned for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 600-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on the display.Midband Chirp Traditional SonarThis 8-pin, 600-watt stainless steel thru-hull transducer features high-definition mid-band...

Tilted Element™ Thru-HullMinimize Your DragThe P19 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206M (700'). These nearly flush units minimize drag as only 5mm (2/10") of the housing extends outside of the hull. The plastic P19 provides...

Tilted Element™ Thru-HullMinimize Your DragThe P19 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206M (700'). These nearly flush units minimize drag as only 5mm (2/10") of the housing extends outside of the hull. The plastic P19 provides...

B285HW Bronze 1kW Wide Beam Chirp Thru-Hull TransducerRequires Mix and Match CableGet more coverage under the boat with Airmar's wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, these transducers are truly broadband at its best. In addition to improving the...

B265LH Bronze Chirp Thru Hull 1kW with Fairing BlockRequires Mix and Match CableImagine knowing what exact frequencies work the best at detecting specific fish species: Bluefin Tuna—60 kHz, Squid—133 kHz, and Cod—175 kHz. Now imagine tuning your fish finder to these frequencies, marking the fish precisely on the screen, then...

P66 Transom Mount Transducer f/Humminbird 9-Pin UnitsFeatures: Depth and temperature in one housing Plastic kick-up bracket Accommodates transom angles between 2° and 20° Recessed waterflow channel protects paddlewheel Transducer can be removed from bracket without the use of tools for easy service and storage Boat Size: Up to 12M (40')...

TM275C-LHW 1kW Chirp Transom Mount TransducerGet more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution....

B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull Transducer f/12-Pin Garmin175MW Med Ultra Wide 20 Degree, 1KW Chirp Thru-hull Transducer with 12 Pin Connector for Garmin Airmar's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull...

B175MW Med Ultra Wide 20°, 1KW Chirp Thru-Hull Transducer with 8-Pin Connector for Garmin Airmar’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new...

FI5001The FI5001 is an analog Wind Transducer for use with NavNet 3D and the FI50 series of instrument displays. It is capable of detecting wind angle accuracy of better than 10° and wind speed accuracy of better than 5% (20 kt). The FI5001 has a power requirements of less than...