ComNav Marine

Rudder FeedbackWaterproof construction with transducer life rated to over 50 million rudder movements. It is suitable for vessels with rudderstock up to 75 mm (3") in diameter. It is mounted near the rudder shaft and connected to the tiller arm or quadrant. Specifications: Type: Parts Box Dimensions: 7"H x 11"W...

Jog SwitchThe ComNav Jog Switch is a permanently mounted, watertight eletrical switch specifically designed for marine service. The spring-centered lever is moved to Port or Starboard as desired to provide non follow-up (time dependent) electrical control of the vessel steering system. The Jog Switch can work in conjunction with any...

ComNavPassive GPS antenna w/8M cable & TNC connector for X2, X3 and X5 AIS' Specifications: Type: Antennas Box Dimensions: 3"H x 6"W x 9"L WT: 1.1 lbs

201 Remote Control with 40' CableThis remote control has 3 modes: Standby, Tiller & Pilot Specifications: Type: Parts Box Dimensions: 4"H x 7"W x 7"L WT: 2.3 lbs Quick Guide (pdf)

Rudder Angle Indicator Watertight CaseThe Rudder Angle Indicator Watertight Case is a good alternative for outdoor applications where flush mounting the RAI may not be possible. In these cases or, when the back of the RAI may be exposed to moisture, we recommend the watertight case. The kit comes complete...

Stand Alone Rudder Angle Indicator SystemComplete single station RAI system typically used on vessels that do not have a ComNav autopilot or, in cases where a separate RAI system is required (such as Hydraulic Full Follow-up steering systems). The Stand Alone System consists of three components: ComNav Rudder Follower w/50'...

Rudder Feedback LinkageThe rudder linkage is self-aligning, self lubricating, corrosion resistant and easily adjustable to varying lengths. Specifications: Type: Parts Box Dimensions: 1"H x 2"W x 7"L WT: 0.6 lbs

Fluxgate CompassSpecifically designed for ComNav Autopilots, the ComNav Fluxgate Compass senses the earth's magnetic field directly. A heeling adjust control is provided to reduce or eliminate the effect of the vessel's vertical field.Features:: Microprocessor controlled Temperature range -15 degrees Celsius to +85 degrees Celsius Power supplied by ComNav autopilot Watertight...

1420 Second Station Kit - Includes Install KitFeatures: Clip mounted allowing both fixed or hand held operation Suitable for small to mid-sized vessels Capable of operating on most standard types of steering systems Waterproof Control Head "Hands Off" automatic yaw, sea state and trim Optional full function remote Output for...

Jog Switch with 2 Sets of SwitchesThe ComNav Jog Switch is a permanently mounted, watertight, electrical switch specifically designed for marine service. The spring-centred lever is moved to Port or Starboard as desired to provide non follow-up (time dependent) electrical control of the vessel steering system. The Jog Switch can...

Mariner X2 Class B AIS Tranceiver** As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the...

TS4 - Full Follow-Up Remote with Auto Function N2K with 6M CableComNav's full follow-up remote with auto function. NMEA 2000, 6 meter cable, for use with P4 Autopilot.  Specifications: Type: Parts Box Dimensions: 1"H x 1"W x 1"L WT: 1 lbs Owner's Manual (pdf)

1001 Autopilot with Magnetic Compass Sensor & Rotarty FeedbackAdvanced Technology for Accurate Steering Simple to OperateFeatures: Fixed station autopilot Suitable for mid-sized vessels, in the range of 30 to 60 feet / 10 to 20 meters Three "Turn" functions, Continuous, Emergency and "U" Turns Compatible with most standard types of...

CT2 Drive BoxComNav CT2 Drive Box are specifically designed to connect Comnav 1001, 1101, 1201, and 2001 autopilots to steering systems using reversing DC Motor Pump sets, Linear actuators or DC Motor Mechanical Drive Units. The CT2 Drive Box features dynamic braking, current limiting and thermal protection of the MOFSET...

Mariner X2 Class B AIS Tranceiver** As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the...

Analog Rudder Angle IndicatorThe analog rudder angle indicator is a backlit 76mm (3in) gauge displaying the actual position of a vessels rudder. All ComNav Autopilots come with built in electronics to drive at least three meters without additional interfacing.Features: Flush mount Water resistant front face Supply voltage for lighting 12-32VDC...

1420 AutopilotSimple to OperateFeatures: Clip mounted allowing both fixed and hand held operation Suitable for small to mid-sized vessels Capable of operating on most standard types of steering systems Waterproof Control Head Automatic yaw, sea state and trim Output for optional analog rudder angle indicator, up to 4 stations Easy...