Deep-Pipe Level Sender - 950mm - 0 to 180 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle...

Deep-Pipe Level Sender - 950mm - 240 to 33 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle...

Deep-Pipe Level Sender - 950mm - 90 to 4 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle...

Deep-Pipe Sensor Wiring Harness - 6MDeep-Pipe Sensor Wiring Harness.Technical Specifications: Length - 6M (20') Communication - Analog Connector Type - TE Superseal 2-Pole IP67 Sensor Type - Tubular Sensors 54mm SS  Operating Voltage - 6 to 24 VDC  *Sold as an Individual This product may not be returned to the original...

Diagnostic ToolVeratron's diagnostic tool is used for programming and troubleshooting.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

EasyLink Connecting Cable for AcquaLink® & OceanLink® GaugesEasyLink connecting cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

EasyLink Extension Cable f/ OceanLink DisplaysUsed to connect the OceanLink EasyLink gauges to OceanLink 4.3" and 7” Displays.Features: Length: .3M (1') Specifically for 7" OceanLink *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns....

Engine Oil Temperature Sensor - 1/2"-14NPT Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a...

Engine Oil Temperature Sensor - 3/8"-18NPT Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a...

Engine Oil Temperature Sensor - Dual Pole, Spade Term - 50-150°C/120-300°F - 6/24V - 1/4" - 18 NPTF ThreadFeatures: Dual Pole, Spade Term 50-150°C/120-300°F 6/24V 1/4" 18 NPTF Thread This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or...

Engine Oil Temperature Sensor - Dual Pole, Spade Term - 50-150°C/120-300°F - 6/24V - M14 x 1.5 ThreadFeatures: Dual Pole, Spade Term 50-150°C/120-300°F 6/24V M14 x 1.5 Thread This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns....

Engine Oil Temperature Sensor - M14x1.5 Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a...

Engine Oil Temperature Sensor - M16x1.5 Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a...

Engine Oil Temperature Sensor - Single Pole, Common Ground - 50-150°C/120-300°F - 6/24V - M14 x 1.5 ThreadFeatures: Single Pole, Common Ground 50-150°C/120-300°F 6/24V M14 x 1.5 Thread This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns....

Engine Oil Temperature Sensor - Single Pole, Spade Connect - 50-150°C/120-300°F - 6/24V - M10 x 1.5 ThreadFeatures: Single Pole, Spade Connect 50-150°C/120-300°F 6/24V M10 x 1.5 Thread This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns....

EngineBox - Double EngineThe EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox has a NMEA 2000® and a J1939 CAN port. The EngineBox can also be used on older, completely analog engines, thanks to...

EngineBox - Single EngineThe EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox has a NMEA 2000® and a J1939 CAN port. The EngineBox can also be used on older, completely analog engines, thanks to...

Flange Adapter KitSmall but necessary instrument that will save your money and time.   Flange Adapter Kit for Tubular Level Sensors from 80 to 54mm.Flange Adapter Kit can be adapted to any Veratron liquid level sensors.Features:Tank mounting adapter from 80mm to 54mm*Sold as an Individual This product may not be returned...

Flush Mounting Kit for 85mm GaugesHardware needed to flush mount Veratron 85 mm gauges.*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Fresh Water Level Sensor (Resistive) with Adjust Lever & Seal Kit #750 - 12/24V - 200-600mm LengthFresh Water Level Sensor (resistive) with adjustable lever, sealing kit N05-008-750. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.