Under $100

Simnet Protection Plug

Attaches transducer to a trolling motor.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 4"W x 9"L WT: 0.25 lbs UPC: 042194535944

Kayak Scupper Transducer MountLowrance's transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmer transducers, both 83/200 kHz and 455/800 kHz DownScan Imaging (DSI) models alike, as well as earlier 1-inch 200 kHz transducers.It's easy to install...

Simrad Power Cable f/NSE NSS & StructureScan 3D, GO7, GO9, GO124 pin conn. to 4 bare wires for power in - power control bus and external alarm - 6.5 ft (2 m). Specifications: Type: Power Cords Box Dimensions: 1"H x 4"W x 5"L WT: 0.3 lbs UPC: 042194901145

HDI Trolling Motor XDCR Adapter CupFor using HDI 83/200 and 455/800 kHz XDCR on a trolling motor Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 8"L WT: 0.2 lbs UPC: 9420024121924

Video Adapter Cable for HDS Gen2Features: 2 ft. adapter cable connects to existing power cable and adds video input connection For displaying video from rear-view, underwater, engine monitoring and night vision cameras or from any video source providing standard video output on an RCA jack

Micro-C Female to SimNet Cable Simrad's Micro-C Female to SimNet 1M Cable

SimNet Cable 1 FootSimNet (Simrad Intelligent Marine Network) is a unique marine electronics network system. Over the last 5 years, it has proven to be one of the most reliable and easy to use networks in the marine industry. SimNet is easy to install with thin cables and small plugs....

N2KEXT-6RD 6' NMEA 2000 Cable 6' NMEA 2000 Cable Specifications: Cable Length (Feet): 6' Data Interface: NMEA 2000 Box Dimensions: 3"H x 4"W x 10"L WT: 0.3 lbs UPC: 042194533582

NSE/NSS Video/Data cableNSE / NSS Video/Comms Cable (8 pin conn. to bare wires for NMEA and 2 RCA female for Video in Port one and two) 2M (6.5')

Adapter cable, 7 pin BLUE to bare wires Specifications: Type: Adapters Box Dimensions: 2"H x 4"W x 7"L WT: 0.3 lbs UPC: 042194535111

50/200kHz Skimmer Transducer Mounting KitFeatures: 50/200kHz Skimmer transducer mounting kit Heavy duty plastic mounting bracket Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 8"W x 9"L WT: 0.5 lbs UPC: 042194536064

HS-WS-SS Mounting KitMounting kit for transom mount 83/200 kHz skimmer transducers Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 4"L WT: 0.1 lbs UPC: 042194504995

LSS-2 HD Skimmer Mounting Bracket - Stainless SteelMounting bracket for LSS-2 StructureScan HD transducer.Specifications:Stainless Steel Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 4"W x 12"L WT: 0.75 lbs UPC: 9420024123751

Lowrance TR-120-KITSet of 1 male and 1 female NMEA 2000r7reg; terminators Specifications: Data Interface: NMEA 2000 Box Dimensions: 2"H x 3"W x 4"L WT: 0.1 lbs UPC: 042194533575

4-Way Block for NMEA 2000 NetworksNavico's 4-Way Block accessory for NMEA 2000 Networks should be used wheremultiple drop-cables are required in close proximity to make a morecost-effective and streamlined solution compared to installations that usemultiple T-connectors. Specifications: Data Interface: NMEA 2000 Box Dimensions: 1"H x 3"W x 9"L WT: 0.2...

Flat Mount Bracket f/StructureScan 3D Ducer & TotalScan Ducer3D Transducer Flush Mount Bracket is used to flush mount the transducer under the boats Hull. Suits TotalScan and 3D Transom Transducers Specifications: Type: Misc Box Dimensions: 1"H x 6"W x 12"L WT: 0.7 lbs UPC: 9420024145944

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an Airmar 5-pin male connector. The...

Adapter 7-Pin Blue Transducer to a 9-Pin Black UnitFeatures: Connects legacy 7-Pin Blue Transducer to a 9-Pin Black Unit Sonic Connector Transducer Adapter Cable Compatible With: HDS Gen3 Elite-Ti Series NSS evo2 GO XSE Series SonarHub™ Specifications: Type: Adapters Box Dimensions: 2"H x 6"W x 8"L WT: 0.2 lbs UPC:...

TotalScan/StructureScan 3D Replacement BracketReplacement bracket for TotalScan & StructureScan 3D Transom Mount TransducersHardware included Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 5"W x 13"L WT: 0.8 lbs UPC: 9420024157183