Transducer Accessories
-
Vendor: AirmarAirmar 10-Conductor In-Line Cable Splice - IP67 [D00342H]10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use brand-specific connectors.Gemeco has introduced a new line of in-line splices that...
- Regular price
-
$35.00
- Regular price
-
List:-Infinity% off ($-35.00) - Sale price
-
$35.00
- Unit price
- per
-
Vendor: AirmarAirmar 11-Pin Low-Frequency Mix Match Cable f/Raymarine [MMC-11R-LDB]11-Pin Low-Frequency Mix & Match Cable for RaymarineSome CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.The permanently-attached 9-meter cable ends in an Airmar 12-pin connector. This cable is...
- Regular price
-
$127.50
- Regular price
-
List:-Infinity% off ($-127.50) - Sale price
-
$127.50
- Unit price
- per
-
Vendor: AirmarAirmar 117WR-1 Crows Foot Transducer Wrench [117WR-1]117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For...
- Regular price
-
$32.10
- Regular price
-
List:-Infinity% off ($-32.10) - Sale price
-
$32.10
- Unit price
- per
-
Vendor: AirmarAirmar 117WR-2 Transducer Hull Nut Wrench [117WR-2]117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with: B117 B150 B744V B744VL B765C SS555 Specifications: Type: Tools Box Dimensions: 1"H x 4"W x 9"L WT:...
- Regular price
-
$45.00
- Regular price
-
List:-Infinity% off ($-45.00) - Sale price
-
$45.00
- Unit price
- per
-
Vendor: AirmarAirmar 117WR-3 Double Handle Transducer Wrench [117WR-3]117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For...
- Regular price
-
$53.73
- Regular price
-
List:-Infinity% off ($-53.73) - Sale price
-
$53.73
- Unit price
- per
-
Vendor: AirmarAirmar 117WR-4 Transducer Housing Wrench [117WR-4]117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V).Use wrench 117WR-2 or 117WR-3 for the hull nut.*Note that this wrench...
- Regular price
-
$35.00
- Regular price
-
List:-Infinity% off ($-35.00) - Sale price
-
$35.00
- Unit price
- per
-
Vendor: AirmarAirmar 164WR-1 Crows Foot Transducer Wrench [164WR-1]164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For...
- Regular price
-
$50.00
- Regular price
-
List:-Infinity% off ($-50.00) - Sale price
-
$50.00
- Unit price
- per
-
Vendor: AirmarAirmar 164WR-2 Transducer Hull Nut Wrench [164WR-2]164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with: B164 SS164 SS264 Specifications: Type: Tools Box Dimensions: 1"H x 6"W x 11"L WT: 0.85 lbs
- Regular price
-
$68.00
- Regular price
-
List:-Infinity% off ($-68.00) - Sale price
-
$68.00
- Unit price
- per
-
Vendor: AirmarAirmar 164WR-3 Double Handle Transducer Wrench [164WR-3]164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For...
- Regular price
-
$84.00
- Regular price
-
List:-Infinity% off ($-84.00) - Sale price
-
$84.00
- Unit price
- per
-
Vendor: AirmarAirmar 175WR-4 Transducer Housing Wrench [175WR-4]175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with: B164 B175 SS164 SS264 IMPORTANT: the design of the housing...
- Regular price
-
$39.00
- Regular price
-
List:-Infinity% off ($-39.00) - Sale price
-
$39.00
- Unit price
- per
-
Vendor: AirmarAirmar 60WR-1 Crows Foot Transducer Wrench [60WR-1]60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For...
- Regular price
-
$35.00
- Regular price
-
List:-Infinity% off ($-35.00) - Sale price
-
$35.00
- Unit price
- per
-
Vendor: AirmarAirmar 60WR-2 Transducer Hull Nut Wrench [60WR-2]60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 9"L WT: 0.55 lbs
- Regular price
-
$45.00
- Regular price
-
List:-Infinity% off ($-45.00) - Sale price
-
$45.00
- Unit price
- per
-
Vendor: AirmarAirmar 60WR-3 Double Handle Transducer Wrench [60WR-3]60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For...
- Regular price
-
$56.00
- Regular price
-
List:-Infinity% off ($-56.00) - Sale price
-
$56.00
- Unit price
- per
-
Vendor: AirmarAirmar 60WR-4 Transducer Housing Wrench [60WR-4]60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 1"H x 4"W x...
- Regular price
-
$36.00
- Regular price
-
List:-Infinity% off ($-36.00) - Sale price
-
$36.00
- Unit price
- per
-
Vendor: AirmarAirmar 75WR-1 Crows Foot Transducer Wrench [75WR-1]75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For...
- Regular price
-
$36.00
- Regular price
-
List:-Infinity% off ($-36.00) - Sale price
-
$36.00
- Unit price
- per
-
Vendor: AirmarAirmar 75WR-2 Transducer Hull Nut Wrench [75WR-2]75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x 9"L WT: 0.65 lbs
- Regular price
-
$46.00
- Regular price
-
List:-Infinity% off ($-46.00) - Sale price
-
$46.00
- Unit price
- per
-
Vendor: AirmarAirmar 75WR-3 Double Handle Transducer Wrench [75WR-3]75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For...
- Regular price
-
$56.00
- Regular price
-
List:-Infinity% off ($-56.00) - Sale price
-
$56.00
- Unit price
- per
-
Vendor: AirmarAirmar 75WR-4 Transducer Housing Wrench [75WR-4]75WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75WR-2 or 75WR-3 for the hull nut.For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 1"H x 5"W...
- Regular price
-
$37.00
- Regular price
-
List:-Infinity% off ($-37.00) - Sale price
-
$37.00
- Unit price
- per
-
Vendor: AirmarAirmar Deadrise Angle Finder - Accuracy of 1/2 Degree [ANGLE FINDER]Deadrise Angle Finder - Accuracy of ± 1/2°Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome time consuming computation of angles.Features: Quickly measures boat hull deadrise angle. Ball Bearing construction for accuracy. Attach to...
- Regular price
-
$25.00
- Regular price
-
List:-Infinity% off ($-25.00) - Sale price
-
$25.00
- Unit price
- per
-
Vendor: AirmarAirmar Furuno 10-Pin Mix Match Cable f/High or Medium Frequency CHIRP Transducers [MMC-10F-HM]Furuno 10-Pin Mix & Match Cable for High or Medium Frequency CHIRP TransducersFeatures: 10-Pin For High or Medium Frequency CHIRP Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 1"H x...
- Regular price
-
$127.50
- Regular price
-
List:-Infinity% off ($-127.50) - Sale price
-
$127.50
- Unit price
- per