ACCESSORIES

AcquaLink® NavSensorThe multifunctional AcquaLink® NavSensor is the gem of all sensors. The inertial sensor complements the inbuilt satellite GPS receiver module to provide accurate readings of the speed of travel as well as the pitch & roll (up and down). Compass readings can be displayed electronically thanks to the embeded...

AM/FM Patch Cable for AIS & VHF Antenna SplitterThis 2M (6') patch cable has a BNC connector that plugs into the Vesper Marine AIS VHF Antenna Splitter and a Motorola plug to connect to your AM/FM radio.Features: 1 x Standard BNC connector 1 x Motorola AM/FM plug 2M (6') in...

Antenna Cable for Cortex® V1 & M1Use this 32 ft cable to connect your antenna to your compatible Cortex VHF and AIS.Features: Cable fitted for Cortex® V1 & M1 32' cable Specifications: Type: Cables Box Dimensions: 2"H x 6"W x 6"L WT: 0.8 lbs UPC: 753759319311

External smartAIS Alarm & Mute Switch Kit for WatchMate XB-8000The WatchMate XB-8000 smartAIS has the ability to trigger an external alarm that can be mounted anywhere onboard. If the XB-8000 detects a risk situation due to a potential collision, anchor drag, or a MOB activation, it alerts you with an...

GA™ 38 GPS/GLONASS Antenna for Cortex® V1 & M1Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile water-resistant housing and provides 3 easy mounting solutions: pole, surface, or under-deck (for the underside of fiberglass decks)....

Power Cable for Cortex - 6'Replacement 6’ Power Cable for the Cortex M1 & V1.

Protective Cover for Vision AIS DisplaysProtective cover designed to fit firmly over the Vision AIS display. It will protect your Vision AIS against harsh sunlight, sea spray, and even light knocks. It is a form-fitting cover molded in a way that will hold its shape, unlike some other display protectors....

VHF Patch Cable for AIS & VHF Antenna SplitterThis 2M (6.5') patch cable has PL259 connectors that connect the Vesper Marine AIS VHF Antenna Splitter and your AIS WatchMate or VHF Radio.Features: 2 x PL259 connectors 2M (6.5') long 50 Ω cable This cable can be used as a patch...

Waterproof USB Cable - 5M (16')USB cable for the AISWatchMate 850, AISWatchMate Vision, and XB-8000 transponders5M (16') USB cable with a waterproof connector that twists locks into the USB socket on a Vesper Marine transponder and has a standard PC USB connector for your laptop. Because it locks into place...

Adapter Plate to Replace BPS/BPJ Panels with BPSE/BPJE PanelsAdapter plate for use when replacing old BPS/BPJ panels with updated BPSE/BPJE type panels. The updated panels are 85mm x 85mm, whereas the old style panels measured 98mm x 98mm. Quick Guide (pdf)

CAN Terminating Resistor V2The VETUS CAN Terminating Resistor V2 provides durable marine-grade construction and design, for use in terminating one end of your CAN Bus Network.

Gasket & Seal Set for Helm Pumps MT30-MT140Full service kit for VETUS Helm Pumps MT40 to MT140 (including the more recent MTP42, MTP53)Consists of shaft seal (HS801 25 x 42 x 7mm) and back plate gasket (HS804).

O-Ring & Cover for Waterfilter 1320Replacement lid (Cover) and O Ring kit for the VETUS FTR1320 series raw water strainer units.Fits all sizes from 38 to 51mm.

O-Ring Set for Waterfilter 1320 - 5-PackThis set contains the O-ring (5x) for the FTR1320 Waterfilter

Replacement O-Rings Set - 5-PackSet of 5 O replacement Ring seals for Vetus FTR330 Series Raw Water Strainers.

Set O-Ring & Cover for Waterfilter 330Features:Vetus part #FTR3301 is replacement strainer cover and o-ring for all Vetus FTR330 series raw water strainersSpecifications:Strainer size: 13 (33/64") to 38 mm (1-1/2")Note: Do not overtighten

Set of Shear Pins for Bow Thruster 45 & 50kgf - 5-PackSet of brass inboard shear pins (3 x 23.3mm) parallel, for the Vetus 45 and 50Kgf Bow Thrusters.

Strainer for Type FTR140This strainer is for the FTR140 waterstrainers.

A.C.E. Transducer EpoxyThe perfect material for any in-hull transducer installation. A.C.E stands for Acoustically Conductive Epoxy. This will ensure the bond between the transducer and the boat hull is perfect every time. The Vexilar A.C.E. transducer adhesive works extremely well for mounting all types of transducers. Everything you need is...

Glo-RingUsing special UV LED’s anglers are able to glow a lure treated with glow paint with only one second of exposure inside the powerful GLO-RING light chamber.  Powered by your either a direct connection to your Vexilar battery via the quick connect charging cable or it can be fully adapted...