autopilots

GRF™ 10 - Rudder Feedback SensorCompatible DevicesPair this sensor with the GHP 12™ to provide rudder position feedback and to detect and avoid rudder stops while sailing or boating.The GRF 10 uses a magnetic sensor to relay position information, eliminating friction that causes other types of sensors to wear out....

Interconnect Cable (Mechanical/Hydraulic w/SmartPump)Use this 5 meter interconnect cable to connect your GHP Reactor autopilot CCU (course computer unit) to ECU (electronic control unit). Includes bare wire connections for alarm and optional Shadow Drive valve. ECU connector includes threaded collar for compatibility with ECU 12 and SmartPump systems.Compatible Devices: GHP...

Interconnect Cable (Steer-by-Wire)Use this 3 meter interconnect cable to connect your GHP™ Reactor autopilot CCU (couse computer unit) to a steer-by-wire controller. Includes bare wire connections for buzzer.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other...

Rudder Feedback Cable5" x 5" x 1" rudder feedback cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cables Box Dimensions: 1"H x 5"W x...

SeaStar Fittings KitFittings kit for plumbing your Garmin hydraulic autopilot for most SeaStar steering systems. What's In The Box?3 pieces of 1/4” NPT male to marine tube male (3/8” compression) fittings kit (nut & sleeve included)WARNING: This product can expose you to chemicals which are known to the State of California...

Shadow DriveThe GHP™ 10's patented Shadow Drive technology gives boaters the security of knowing they maintain control even when relying upon the autopilot. Use this Shadow Drive attachment to automatically disengage the autopilot if the helm is turned, allowing the helmsman to maneuver the boat.  1/4" Female NPT FittingsCompatible Devices:...

Solenoid Power CableThis power cable integrates protection diodes and self-healing fuses to protect your ECU from hazardous voltages generated by hydraulic solenoid coils when used in a solenoid configuration. For use with the GHP Reactor Mechanical/Solenoid/Retrofit corepack.WARNING: This product can expose you to chemicals which are known to the State...

Need to replace a split connector? Our replacement split connector helps you easily route cables during installation and eliminates the need to drill large holes in your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other...

Verado Adapter KitFittings kit for plumbing your Garmin hydraulic autopilot for most Verado steering systems. What's In The Box? 4 ¼” NPT to ORFS adapters 2 ¼” NPT Male to female adapters 4 NPT male to ORFS female adapters 2 ORFS tees 2 high pressure rated ORFS shut off ball valve...

Spacer Kit for Type T System - 0.51"Features: 13mm (0.51") Spacer Kit Use with 90° bezel Specifically for Type T System Specifications: Type: Parts Box Dimensions: 1"H x 5"W x 5"L WT: 1 lbs UPC: 628309133788

Type A Controller f/Boats with an Existing Autopliot No need for additional drive units. The Intellisteer Wireless Controller is designed to be wired between a Course Computer and Autopilot Drive When the Intellisteer Wireless Controller is activated it will disconnect the autopilot and provide wireless jog steering control from anywhere...

Type H for Boats with Hydraulic SteeringFeatures: Connects to any hydraulic steering system Rugged Octopus hydraulic pump Adds pushbutton steering to your hydraulic steering Current 3-6A Typical, 15A Peak Includes all hoses and fittings Wireless control module plus handheld pendant - steering in the palm of your hand Steer, fish...

Type S for Straight Shaft Helms for Cable Steered Boats with Dash Mounted WheelFeatures: Replaces existing helm Electronic clutch disengages for manual steering Rotary drive system Fits behind dash Safety override technology Current 1.25A Typical, 5A Peak Wireless control module plus handheld pendant - steering in the palm of your...

Type T for Helms with Tilt Function for Cable Steered Boats with Dash Mounted WheelFeatures: Replaces existing helm Electronic clutch disengages for manual steering Rotary drive system Fits behind dash Safety override technology Current 1.25A Typical, 5A Peak Wireless control module plus handheld pendant - steering in the palm of...

Wireless Remote For adding a second pendant, or to replace original Can be paired in field with existing receiver Includes 2x AA Batteries Specifications: Type: Parts Box Dimensions: 2"H x 6"W x 7"L WT: 0.6 lbs UPC: 628309263348 Brochure (pdf)

Lowrance Outboard Cable-Steer Pilot PackEverything you need in one box to fit an autopilot to your outboard motor, the Outboard Pilot lets you focus on fishing activity while keeping the boat on course. When connected to a Lowrance HDS Gen2 or Gen2 Touch, the Outboard Pilot can steer to a...

NAC-1 Outboard Hydraulic Autopilot PackFeatures: Easy to Install, available for both Hydraulic and Cable steer systems Dash-mount button for one-touch Auto/Standby activation Steer to Heading, Course, or Route Automatic Turn Patters NAC-1 Plug & Socket connectors – no screw terminals or wire stripping necessary High efficiency, super-quiet 0.8L hydraulic gear...

NAC-1 Precision Hydraulic Autopilot PackFeatures: Easy to install system pack, hydraulic connectors, and hoses all included Dash-mount button for one-touch Auto/Standby activation Steer to Heading, Course or Route Automatic Turn Patters NAC-1 Plug & Socket connectors reduce the installation time High efficiency, super-quiet 0.8L hydraulic gear pump In the Box:...

Precision-9 CompassPrecision-9, a solid-state compass that measures motion on nine separate axis alignments. Designed for both recreational and commercial markets.Advantage of InnovationThe Precision-9 compass D which replaces the RC-42N rate compass D features modern, solid-state technology and components. Customers will notice dynamic improvements in performance of autopilot control and stabilized...

Pump-2 MK2 Reversible Hydraulic Pump for SteadySteerFeatures: For cylinder displacement of 80 cc - 250 cc (4.9 - 15.2 cu. in) O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings SteadySteer compatible. (NAC-2 / AC12 required)