Transducers

CM599LH 1-3kW Pocket Mounted Transducer - No ConnectorHaving the right tool for the job makes the job easier and gives better results. The right tool for covering deep-water haunts of swordfish, tuna, and other species is a 2 to 3 kW, low and high-frequency transducer. The Chirp-ready CM599LH gives the...

Eagle SplitShot Transom Mount Transducer with 20 ft. CableWide Angle, High-Res Images Get the best underwater views below the boat with SplitShot HD, featuring the fish-finding capability of wide-angle high CHIRP sonar and the high-resolution images of fish-holding structure from DownScan Imaging™.Unlock FishReveal™  Take the guesswork out of fish identification with...

Active Imaging 2-in-1 Transducer & 83/200 Pod In-Hull Transducer with Y-Cable Allows for connection of an in-hull puck transducer and an Active Imaging 2-in-1 (Side/Down) transducer to the single sonar port of an Elite Ti2 or Elite FS display.Features: Active Imaging 2-in-1 Transom Transducer 83/200 Pod/Puck Transducer without temperature Dual 9-pin...

Eagle TripleShot Transom Mount TransducerThree Technologies, One TransducerHave the best chance of finding fish with underwater views to the side and below the boat, all in one transducer. TripleShot HD Transducer features the fish-finding capability of wide-angle high CHIRP sonar and the high-resolution images of fish-holding structures from SideScan and...

B75HW High Wide Tilted Element Chirp Transducer - 20 Degree Deadrise, 600W Thru HullRequires Mix and Match Cable for the appropriate Fishfinder it will be connected to.Airmar’s low-profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The B75HW combines the benefits of the high-frequency...

B175MW Medium Ultra-Wide 20-Degree 1kW CHIRP Transducer Requires Mix & Match CableAirmar’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a level by using medium...

B175MW Med Ultra Wide 20°, 1KW Chirp Thru-Hull Transducer with 8-Pin Connector for Garmin Airmar’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new...

B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull 12-Pin Transducer for Furuno TZTouch3The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved...

B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull Transducer f/12-Pin Garmin175MW Med Ultra Wide 20 Degree, 1KW Chirp Thru-hull Transducer with 12 Pin Connector for Garmin Airmar's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull...

B60 20° Bronze Thru-Hull Mix & Match Cable NeededThe B60 is a 600 W, 50/200 kHz transducer that integrates Airmar’s popular, Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at either a 20° or 12° angle within the housing. When the transducer is installed almost flush...

B117 50/200kHz 600W Mix & Match 0° DeadriseAirmar’s entry-level B117 features a single, 50/200 kHz, dual-frequency, ceramic element in a low-profile bronze housing. The nearly-flush design minimizes drag with only 5 mm (3/16") extending outside the hull.Features: Depth only or depth and fast-response water-temperature sensing 600 W of power Dual-frequency...

B175 Medium Ultra-Wide 1kW 12-Degree 12-Pin Connector for GarminAirmar's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium...

B175L Bronze 12 Degree Thru-Hull 1kW - Requires Mix & Match CableAirmar’s low-profile, Chirp-ready transducers are the perfect addition to smaller boats such as center consoles. The B175L transmits across low frequencies from 40 to 60 kHz, delivering excellent coverage and tracking. This transducer has up to 20 kHz of...

Open Water Universal Transducer KitThis is a 3-in- 1 transducer mounting kit that comes with a 20 degree transducer that has everything you need to mount it externally for high speed use, with a suction cup mount for portable use or with a special bracket to allow you to attach...

B60 12 Degree Tilt Thru Hull Req Mix & Match CableThe B60 is a 600 W, 50/200 kHz transducer that integrates Airmar’s popular Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at either a 20° or 12° angle within the housing. When the transducer is installed...

165T/275LHW-12P Pocket Mount Combo Transducer for DFF3D & TZT3 DisplaysPocket Mount Combination TransducerThis is a new size housing (12 LX 5 W X 3.5 H) that contains DFF3D elements along with CHIRP elements.Standard Features DFF3D operating frequency 165 kHz Low—CHIRPS from 42 kHz to 65 kHz, Beamwidth 25° to 16°...

B265LH 1kW Thru Hull TransducerFeatures: Bronze 1kW Temperature Included Specifications: Chirp: Low/High Temperature: Yes Speed Included: No Mounting Style: Thru-Hull Imagining: Standard Box Dimensions: 7"H x 19"W x 26"L WT: 26 lbs UPC: 723193706237 Owner's Manual (pdf)Brochure (pdf)

Transom Mount TM265LH 1kw Chirp Transducer for CP450CFeatures: Depth/Temp Transom Mount Urethane CP450C Plug on Cable Frequency: L=42-65 kHz, H=130-210 kHz Power 1kW Specifications: Temperature: Yes Speed Included: No Mounting Style: Transom Chirp: Low/High Cable Length (Feet): 30' Imagining: Standard Box Dimensions: 8"H x 10"W x 12"L WT: 11.4 lbs...

B275LH-W Bronze Thru-Hull - Low & High Wide FrequencyGet more coverage under the boat with the wide beam CHIRP product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of...

B175H-W 1KW Bronze Thru Hull 20° Tilted ElementInstallation: Thru HullMaterial: UrethanePower (RMS): 1kWMax Depth(ft): 800Frequency (KHz): 150-250Records: Depth and TemperatureApproved Hull Material: Fiberglass / WoodCable Length (ft/M): 6ft/2mSupported deadrise: 16-24° DeadriseADDITIONAL NOTES: All wide beam products come with a 2M pigtail off the transducer. Requires a Transducer Extension cable for...