Transducers

B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12ºThe bronze B60-12º provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in, deadrise compensation. The resulting vertical beam gives excellent echo returns for more-accurate depth readings. The nearly-flush housing minimizes drag with...

165T/275LHW-12P Pocket Mount Combo Transducer for DFF3D & TZT3 DisplaysPocket Mount Combination TransducerThis is a new size housing (12 LX 5 W X 3.5 H) that contains DFF3D elements along with CHIRP elements.Standard Features DFF3D operating frequency 165 kHz Low—CHIRPS from 42 kHz to 65 kHz, Beamwidth 25° to 16°...

Airmar B75Mw/12° Tilt600WFlush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. This broadband transducer is designed to allow both traditional and Spread Spectrum scanning when used with a compatible sonar like the GSD 26. It features a bronze, thru-hull mount...

Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 20° Tilt, 8-Pin - Airmar B175HWStep up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage.The tilted element inside the transducer accommodates...

Combined Speed/Temperature and Depth Transducer for use with the mn100 Micronet system. Supplied with thru hull housing and blanking plug and 3 meters of cable.Features: Requires only one hole in the hull Standard 51mm (2") hole size Internal Temperature Sensor

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20°Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance...

B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12°Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Elementâ„¢ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance...

235DST-MSE Bronze Thru-Hull, Digital Depth, Speed & Temp Sensor - 7-PinFeatures: 200 Watts 235 kHz Bronze Thru-Hull Depth, Speed and Temperature (+/- 1°) 10-Meter Cable with 7-Pin Connector Can be flush mounted on a hull with up to a 22° dead rise WARNING: This product can expose you to chemicals...

SS75M Stainless Steel Thru-Hull Chirp Transducer - 20° Tilt - Med FrequencyFeatures: Frequency: Chirp 80 - 130 kHz Power Rating: 600 Watts Connector: 10 Pin Tilt: 20 Degree Deadrise of Hull: 16-24 Degrees This product may not be returned to the original point of purchase. Please contact the manufacturer directly...

Bronze 20 degrees tilt-element thru-hull w/temp for 16 degrees to 24 degrees hull deadrise (Beam angle:45 degrees @50kHz,12 degrees @200kHz) Specifications: Pins: 8 Mounting Style: Thru-Hull Imagining: Down Chirp: No Cable Length (Feet): 30' Temperature: Yes Speed Included: No Box Dimensions: 4"H x 8"W x 11"L WT: 4.9 lbs UPC:...

B75H Bronze Chirp Thru Hull 12° 600WRequires Mix & Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater...

TM185C-HW High Frequency Wide Beam CHIRP Transom Mount 14-Pin Transducer for HumminbirdGet more coverage under the boat with Airmar's wide beam Chirp. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, this transducer is truly broadband at its best. In addition to improving the performance of...

Airmar B75Mw/20° Tilt600WFlush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. This broadband transducer is designed to allow both traditional and Spread Spectrum scanning when used with a compatible sonar like the GSD 26. It features a bronze, thru-hull mount...

TM265LH Plastic Transom Mount Transducer w/Depth & Temp - 12-PinGarmin's plastic transom mount performs well in deep water and provides exceptional bottom and water column detail.The best performing 1 kW transom mount, this transducer has a maximum depth of 3,000 feet; an operating frequency of 42 to 65 kHz and...

DST-810MSF Bronze Thru-Hull, Digital Depth, Speed, Temp Sensor, NMEA2000 Airmar B617V Housing Style TransducerThe DST-801MSF offers depth, speed, and temperature in a single, 51 mm (2”) fitting. Only one hole through the hull simplifies the installation — an attractive feature for boat builders and boat owners alike. Patented, speed-signal-processing and upgraded...

RV-412 Stainless Steel Thru-Hull RealVision 3D 12° - PairRV-412 RealVision Transducer Stainless Steel Split 12° Low-Profile TH 2M w/ Y-Cable and 8M Extension Cable brings RealVision 3D, CHIRP DownVision, SideVision and High Frequency CHIRP sonar into a low-profile stainless-steel housing. The RV-412 features rugged stainless steel through hull bodies suitable...

Airmar B175Lw/12° Tilt1kWFlush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies....

RV-400 Stainless Steel Thru-Hull RealVision 3D 0°The RV-400 brings RealVision 3D, CHIRP DownVision, SideVision and High Frequency CHIRP sonar into a low-profile stainless-steel housing. The RV-400 features rugged stainless steel through hull bodies suitable for fiberglass, wood or metal hulls. Each transducer comes with an isolation kit that creates separation...

XM 9 HW MSI T MEGA Side Imaging+™ Transom Mount TransducerMEGA Side Imaging+ Transom Mount Transducer supports MEGA Imaging+/800kHz/455kHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature sensor, all metal bracket and 20’ cable. Features: This accessory is compatible with the following Humminbird products:...

P66 Transom Mount Transducer f/Humminbird 9-Pin UnitsFeatures: Depth and temperature in one housing Plastic kick-up bracket Accommodates transom angles between 2° and 20° Recessed waterflow channel protects paddlewheel Transducer can be removed from bracket without the use of tools for easy service and storage Boat Size: Up to 12M (40')...