Aluminum Clamp-On Rod Holder - Horizontal - 1.05" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick...

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 2.375" O.D. PipeColor:WhitePipe Size:#5Fits:2.375" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an...

Fishing Rod Holder - 65° Angled Flush Mount - Chrome Plated ZincFeatures: Chrome Plated Zinc Alloy Flange Angled Flush Mount (Approximately 65°) Anodized Aluminum Tube Soft Black Liner Flange Gasket with Integral Flip-Up Cap D01 & DPD - Integral Drain Bib or 5/8 Inch I.D. Flexible Hose Specs: Mount Type:...

Description - Cast 316 S.S. with full length vinyl liner. Fastener 1/4" Material: 316 Stainless Steel Fastener: 1/4" (3) Dimensions: L: Tube Length: 8-5/8" Flange: 3-5/16" x 4-5/16" Inside Diameter: Tube ID: 1-5/8

Aluminum Clamp-on Rod HoldersModel:  RA5203SLColor:   SilverFits:      1.660" O.D. PipeMount:  HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom...

Stainless SteelFlush MountSwivel Rod Holders80 Series30°10-1/2" Length1-7/8" ID Swivel base ideal for bent butt rod fishing Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish Cast 1-piece stainless steel swivel cup Super smooth turning precision-machined 1/2" pivot with fine...

Stainless SteelFlush MountSwivel Rod Holders80 Series15°10-1/2" Length1-7/8" ID Swivel base ideal for bent butt rod fishing Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish Cast 1-piece stainless steel swivel cup Super smooth turning precision-machined 1/2" pivot with fine...

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there...

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there...

Stainless Steel 90° Flush Mount Rod Holder A value priced, vertical mount rod holder! This Economy 90° Flush Mount Rod Holder with Cap is constructed of formed 304 stainless steel with a plastic liner, mounting gasket, and integral cap. Features a 90° angle. Accommodates rods up to 1-1/2”. Installs with three...

Stainless Steel Flush Mount Rod Holder with Cap - 30° Flush Mount Rod Holder with Cap is constructed of corrosion resistant formed 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners...

Side Mount Rod Holder - Black Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to 1-3/4” in diameter. Installs with two #10 RH fasteners (not included).WARNING:...

Aluminum Clamp-On Rod Holder - Horizontal - 1.315" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick...

Aluminum Clamp-On Rod Holder - Horizontal - 2.375" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick...

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there...

Stainless Steel Side Mount Removable Rod Holder Side Mount Rod Holder slides in and out of mounting plate for a lower profile while not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16”. Installs with four #10 FH fasteners (not...

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.315 O.D. PipeColor: BlackPipe Size: #2Fits: 1.315" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod...

Single Aluminum 5° Transom Mount Rod HolderThe perfect way to add rod holders to the transom area. Designed with outboard engine wells in mind. An ideal way to add rod holders to a seating station. These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tallgimbal bar,...

Aluminum Clamp-on Rod HoldersModel:  RA5201SLColor:   SilverFits:      1.050" O.D. PipeMount:  HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom...

Adjustable Mid Mount Rod Holder - 7/8" or 1" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized...