Marine Navigation & Instruments - NMEA Cables & Sensors

Micro Cap - Used to Cover Male ConnectorMicro cap used to cover male connectors. Specifications: Connection Gender: Male Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 873804001395

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it...

The TR3K temperature probe is for use with the Maretron TMP100 Temperature Module (optional extra) or the DCM100 DC Monitor (it is included with the DCM100). This probe ends in a ring terminal and can be used to measure battery temperature or any other under-bolt temperature. The temperature range is...

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it...

5-way SeaTalkng Connector used for connecting spurs to the backbone.

Spur CableRaymarine 3 meter Spur Cable for SeaTalkng Specifications: Cable Length (Feet): 10' Box Dimensions: 1"H x 7"W x 8"L WT: 0.5 lbs UPC: 723193060407

Spur CableRaymarine 1 meter Spur Cable for SeaTalkng Specifications: Cable Length (Feet): 3' Box Dimensions: 1"H x 6"W x 7"L WT: 0.05 lbs UPC: 723193060391

Spur CableRaymarine 400MM Spur Cable for SeaTalkng Specifications: Cable Length (Feet): 1' Box Dimensions: 1"H x 6"W x 7"L WT: 0.05 lbs UPC: 723193060384

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it...

Like the straight Micro/Mid Field-attachable connectors, the 90 degree field attachable connectors allow you to make field conections to bulk cable. The 90 degree connectors are particularly well suited for tight spaces like the back of displays where there is limited space for a straight connector. Useful in tight spaces...

NMEA 2000 starter kit includes:Do you need to build a basic NMEA 2000 network? Look no further than our NMEA 2000 starter kit. This kit includes an NMEA 2000 drop cable (2 m), NMEA 2000 backbone cable (6 m), NMEA 2000 power cable (2 m), two NMEA 2000 T-connectors, NMEA...

The TLM150 is used to sense levels of gasoline tanks using ultrasonic technology and transmit the gasoline levels over the NMEA 2000 network. This allows you to observe gasoline tank levels anywhere on the vessel where there is an NMEA 2000 compatible display such as the Maretron DSM250. The TLM150...

Motion Detector for SIM100Passive Infrared Motion Detector (PIR)Attaches to Maretron SIM100 for NMEA 2000® network monitoringWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

NMEA 2000 90° Elbow ConnectorAncor's NMEA 2000 Approved 90 degree elbow makes cable routing easier. The connector is installed between two cables to reduce stress on the cables and create a compact installation.Features: Color coded for easy installation and component identification NMEA 2000 Approved, 100 percent universal and compatible with...

NMEA 2000 Single Device Backbone Starter KitBasic starter kit for adding a new NMEA 2000 network to your boat.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go...

NMEA 2000 Female TerminatorAncor's NMEA 2000 Approved Terminators allow for proper termination of an NMEA 2000 network. The yellow couplers connect to the corresponding Ancor tees, creating a simplified, color coded network installation. One male and one female terminator is required for each NMEA 2000 network.Features: Color coded for easy...

NMEA 2000 Drop Cable - 1MAncor's NMEA 2000 Approved Drop Cables offer connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The drop cables are smaller in diameter and more flexible than backbone cables...

NMEA 2000 Male TerminatorAncor's NMEA 2000 Approved Terminators allow for proper termination of an NMEA 2000 network. The yellow couplers connect to the corresponding Ancor tees, creating a simplified, color coded network installation. One male and one female terminator is required for each NMEA 2000 network.Features: Color coded for easy...

NMEA 2000 Backbone Cable - 10MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone cables are available in four lengths from 0.5 meter (1.6 feet) to 10...

NMEA 2000 Inline TerminatorFor proper termination of a network in a single piece, space saving design. The inline terminator connects between a backbone cable and a drop cable, while still maintaining proper termination for the end of the network.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which...