Marine Navigation and Accessories

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it...

3M Cable connect DSM30 or DSM300 to the new a, c, e series

RayNet (M) To STHS (M) Adapter 400mm Connect Classic or Wide to RayNet Radars

VHF NMEA0183 To SeaTalkng Converter KitRaymarine's VHF NMEA0183 to Seatalkng Converter Kit is used for connecting an Isolated NMEA0183 VHF to the SeaTalkng network. Specifications: Data Interface: NMEA 0183 Box Dimensions: 2"H x 6"W x 9"L WT: 0.5 lbs UPC: 723193783153

EVC Link CableConnects Y-Loom to ECI-100 Unit1 Meter

Y-Loom CableConnects SeaTalkng network to Volvo Penta IPS system

Yamaha Command-Link Plus CableThe Yamaha Link Cable is connected between the NMEA2000 (DeviceNet) connector of the ECI-100, and the available socket on the Yamaha Command-Link or Command-Link Plus hub.

RayNet(M) to RayNet(M) Cable - 100mmThe RayNet (M) to RayNet (M) Cable Joiner adapter lets you connect two standard RayNet networking cables together in instances where you need to extend the length of a cable run. Data: EthernetLength: 100mm

RayNet(F) to RayNet(F) Port Connectivity - 400mmThe RayNet (F) to RayNet (F) network cable can be used to daisy-chain 2 adjacent RayNet devices together. It is also useful for joining two adjacent HS-5 Network Switches together on larger systems where multiple switches are necessary. This network cable is 15-inches (400mm)...

Masthead Cable & BaseRaymarine's 30M Masthead Cable and Base for Raymarine ST60 and i70.

RayNet Cable Pullers - 5 PackRaymarine's Cable Pullers securely attach to the twist-lock plug on RayNet networking cables and provide a convenient, center-mounted attachment point for your pull string. The cable puller protects the connector's internal pins from damage, acts as a fairing to make pulls through tight spaces easier,...

Raynet to RJ45 Female Adapter 100mmThis adapter has a RayNet Female connector at one end, and a RJ45 Female Gland connector at the other end. The Gland makes the RJ45 Female socket watertight. A typical use for this cable would be to convert a RJ45 Digital Radar Cable to a...

3-Pin, 12/24V Power Cable - 1.5M f/DSM30/300, CP300, 370, 450, 470 & 570Features: Length: 1.5M 12/24V 3-Pin Compatible Devices: DSM30 DSM300 CP300 CP370 CP450 CP470 CP570 CP200 E120 Specifications: Type: Power Cords Box Dimensions: 1"H x 10"W x 10"L WT: 0.35 lbs UPC: 723193798096

Ethernet Cable for M-Series - 25'FLIR's 25' Ethernet Cable is for connecting the FLIR M-Series Cameras tothe Joystick Control Unit.Features: Double Shielded RJ-45 LSZH 25' long Specifications: Cable Length (Feet): 25' Box Dimensions: 2"H x 7"W x 8"L WT: 0.6 lbs UPC: 815121010773

Ethernet Cable for M-Series - 50'FLIR's 50' Ethernet Cable is for connecting the FLIR M-Series Cameras tothe Joystick Control Unit.Features: Double Shielded RJ-45 LSZH 50' long Specifications: Cable Length (Feet): 50' Box Dimensions: 2"H x 8"W x 9"L WT: 1.6 lbs

Video Cable F-Type to BNC - 25'25' Cable - F-Type on one end, BNC on the other endFor use with MD-Series Specifications: Type: Cables Box Dimensions: 2"H x 6"W x 6"L WT: 0.9 lbs UPC: 815121010803

Video Cable F-Type to BNC - 50'50' Cable - F-Type on one end, BNC on the other endFor use with MD-Series Specifications: Type: Cables Box Dimensions: 2"H x 8"W x 9"L WT: 1.8 lbs UPC: 815121010810

RJ45 Waterproof ConnectorFLIR's RJ45 waterproof connector is a key component for installing and operating your maritime thermal camera from FLIR. The RJ45 waterproof connector connects the thermal camera itself to the Joystick Control Unit (JCU) using an Ethernet cord, transmitting both data and electricity along a single cord. FLIR has...

Weather Cover for Joystick Control UnitFLIR's Joystick Control Unit Weather cover is a protective covering for the Joystick Control Unit of your maritime thermal imaging camera. It is designed to protect your Joystick Control Unit (JCU) from the dangers of the open ocean. Built specifically for marine use, JCU Weather...

RayNet to RJ45 - 100'RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays.The RayNet connector is used for connecting network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover...