Lee's Tackle

Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Shimano TLD50 LRS (2 Speed)Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in...

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 1.050 O.D. PipeColor: WhitePipe Size: #1Fits: 1.050" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod...

Aluminum Clamp-on Rod HoldersModel:  RA5002GLColor:   GoldFits:      1.315" O.D. PipeMount:  VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom...

Aluminum Clamp-on Rod HoldersModel:  RA5001GLColor:   GoldFits:      1.050" O.D. PipeMount:  VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom...

RH53515 Degree Heavy Duty Vinyl Rubber Insert for RH534H, RH534HS, RH5334H, RH579H

Vinyl Rubber InsertsClamp-On Rod Holder Rubber InsertsOutside diameter is about 1-7/8” or (1.902”) inches.Inside diameter is about 1-5/8” inches.Overall length is 7-1/2” inches

RH5930Stainless Steel Backing Plate for 0°, 15° & 30° Heavy Rod Holders.

RH5931Stainless Steel Backing Plate for 0°, 15° & 30° Medium Rod Holders.

Flush Mount Rod HolderRH-529HS Medium 15° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 5"W x...

Swivel Base Rod HoldersRH570XLStainless Steel Side Mount w/ Swivel Base Extra LongThis holder is 4" longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface.Without a doubt, our swivel base rod holder is the Ultimate...

Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.315" O.D. PipeColor:BlackPipe Size:#2Fits:1.315" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an...

Flush Mount Rod HolderRH-527VS Medium 0° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x...

Single Rod Rack SetsAnodized Finish: White Powder Coat FinishSimple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into Closed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placed into Locking End of set...

Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.050" O.D. PipeColor:WhitePipe Size:#1Fits:1.050" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an...

Aluminum Clamp-on Rod HoldersModel:  RA5003SLColor:   SilverFits:      1.660" O.D. PipeMount:  VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom...

Swivel Base Rod HoldersRH579XLHalf Angle 15° Extra Long TubeStainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt...

Gunnel Mount Outrigger HoldersOH2016SSize: 1.75"Dimensions: 3 1/2 x 6Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service...

AP3719XS/SK19' Extra Strong Bright Silver FinishWorks With 2" Skiff Style Holders OH219F OH2020S OH2200T Specifications: Construction: Anodized Aluminum Diameter (Inches): 2" Finish: Silver Length (Feet): 19' Box Dimensions: 5"H x 7"W x 51"L WT: 17.3 lbs UPC: 096811371941

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 1.660 O.D. PipeColor:WhitePipe Size:#3Fits:1.660" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an...

12' MKII Bright Silver Pole w/Black Spike1 3/8" diameter Specifications: Length (Feet): 12' Finish: Silver Diameter (Inches): 1-3/8" Construction: Anodized Aluminum Box Dimensions: 4"H x 4"W x 51"L WT: 4.2 lbs UPC: 096811871205