Hunting & Fishing - Rod Holders

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-525SS/XS Medium 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W...

Flush Mount Rod HolderRH-527VS Medium 0° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x...

Swivel Base Rod HoldersRH579Half Angle 15° Stainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate...

Swivel Base Flush Mount Rod HolderPart #: RH-5367SS Medium 0 Degree Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate...

Flush Mount Rod HolderRH-525SS Medium 30° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 6"H x 6"W x...

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-529HS/XS Medium 15°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 5"W...

Weld On Aluminum Flared Rod Holder with Blade 10"Specifications: Length: 10" ID: 1-7/8" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bolt On Transom Mount Rod HolderFeatures: Polished aluminum 4 hole 3" x 4-1/2" brushed pad 10" flared rod holder WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go...

9" Swivel Side Mount Rod Holder - 1-5/8" I.D. 316 Stainless Steel Designed for applications where clamp-on or flush mount holders are not practical Can be mounted on any vertical flat surface White vinyl insert included to protect your rod

Stainless Steel 15° Rod & Cup Holder - Drain - Round TopFeatures 316 Stainless with Round Top 15º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 15 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.55 lbs UPC: 857515002070

Stainless Steel 30° Rod & Cup Holder - Drain - Round TopFeatures 316 Stainless with Round Top 30º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.55 lbs UPC: 857515002018

10.5" 0-Degree Swivel Rod Holder - Screwless - Stainless SteelFeatures: 316 Stainless Steel 2-5/8" Cut Out Requires Installation Wrench

Weld On Aluminum Flared Rod Holder without Blade Mill Finished 10" Specifications: Length: 10" ID: 1-7/8" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flush Mount Rod Holder - 0 Degree - Black Liner with Drain - No LogoFeatures: 316L Stainless steel 1-5/8” Inner diameter Fits 2-3/16” hole diameter Cap size 4-1/2” long x 3-5/8” wide 9” Tube length 1/4” wide x 1/2” tall gimbal bar Cast models feature a 1/2” drain hole The...

Aluminum Clamp-On Rod Holder - Horizontal - 1.90" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick...

536810C - Flush Mount Rod Holder - 15 Degree - Cast - 10.5" DeepThe larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole.  Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough...

Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong...

Flush Mount Rod Holder - 0 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl LinerThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a...

1 1/4" Square Rail Mount243Provides verstile mounting without having to drill more holes in your boat. Perfect for boats with limited mounting surfaces. Stainless steel fasteners (included) hold this tough mount securely in place works with all Scotty post mount rod holders.Fits 1 1/4" square railsWARNING: This product can expose...

Fully Adjustable rod holder with over 9" of composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features: Unique Side or Deck Mounting Bracket Tilts up and down, including upright for rod storage when travelling Less missed strike opportunities Swivels 360 degrees Mount Dimensions 4" x 2" x...