Glolo basis collection - Do not delete

AB-1100 Flotation Bomber Jacket - Hi-Vis Yellow/Black - SmallStanding watch or working on deck in cold and wind can wear down an able seaman in hours.  Choosing the right protective clothing can make the difference between staying alert or risking personal safety on board.  Designed to keep rescue professionals safe,...

AV-1000 Kayak Style Duty PFD - Green - XS/SThis kayak-based design is for use in operations that may require immersion or swimming in water. Engineered for all-day comfort. This design allows full freedom of upper body movements such as climbing and uninhibited use of sidearms and rifles.Features: USCG Type III...

Re-Arm Kit - 24 Gram - ManualRe-Arm kit for Manually inflated PFDs.Features: 1/2" Thread Maximum Inflation Classified UL Marine In the Box: 24 Gram CO2 Cylinder Instruction Manual *Sold as an Individual Specifications: USCG Approved: Yes Box Dimensions: 2"H x 6"W x 7"L WT: 0.4 lbs

RTB-50 Emergency Throw Bag - 50'This throw bag features up to 50’ of high strength 3/8” polypropylene rope with reflective strands to improve visibility during low-light operations.*RBA-100 Micro inflatable emergency vest not included Features: Strong polypropylene rope with reflectors for increased visibility Bag made of quick-drying nylon. Mesh allows the bag...

GatorSkinz™ Non-Skid Step Pad - Black Grit - 12" x 24"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers...

GatorSkinz™ Non-Skid Step Pad - Grey Grit - 16" x 4"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers...

GatorSkinz™ Non-Skid Step Pad - Black Pebble - 16" x 4"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers...

GatorSkinz™ Non-Skid Step Pad - Black Grit - 16" x 4"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers...

RS-1008 Ice Rescue Suit Hi-Vis Yellow - Jumbo (Built to Fit Over 6')Made for cold water and ice rescue operations. This universal-fitting suit is made of a rugged, high-tenacity nylon shell with a soft and easy-to-don liner.Features: Rugged elbow and knee patches Dual ice-pick pockets Removable harness system Boots fit...

IDMK X12 XPLORE 12 In-Dash Mounting BracketIn-dash mounting kit for the Humminbird XPLORE Series fish finder is made with rugged, high-strength aluminum for a quick and easy install. This kit includes mounting hardware.Features: Allows for quick and easy in-dash installation Rugged, high-strength aluminum design Contains all necessary mounting hardware 1-Year...

IDMK X10 XPLORE 10 In-Dash Mounting BracketIn-dash mounting kit for the Humminbird XPLORE Series fish finder is made with rugged, high-strength aluminum for a quick and easy install. This kit includes mounting hardware.Features: Allows for quick and easy in-dash installation Rugged, high-strength aluminum design Contains all necessary mounting hardware 1-Year...

IDMK X9 XPLORE 9 In-Dash Mounting BracketIn-dash mounting kit for the Humminbird XPLORE Series fish finder is made with rugged, high-strength aluminum for a quick and easy install. This kit includes mounting hardware.Features: Allows for quick and easy in-dash installation Rugged, high-strength aluminum design Contains all necessary mounting hardware 1-Year...

UV-Resistant Marine Heat Shrink Tape - 96MM x 55M Roll - Serrated Edge White9.0 mil, UV-resistant polyethylene film tape used for marine shrink applications and vapor barrier seaming in boat storage and transportation applications, as well as for patching, repairing, bundling, wrapping, and sealing applications across various surfaces. Designed with...

MEGA 360 Hardware Kit for Ultrex QuestThis is a MEGA 360 Imaging transducer mount for Minn Kota Ultrex and Ultrex Quest trolling motors. This mount does not include the MEGA 360 Imaging transducer pod or shaft.Features: Mounting plate for installing a MEGA 360 Imaging transducer on a Minn Kota Ultrex...

MEGA 360 PC - MEGA 360 Power CableThe MEGA 360 PC is a 10' marine-grade power cable for a MEGA 360 Imaging transducer. One end provides a quick-disconnect plug for easy connection to an existing MEGA 360 transducer, while the other end features two tinned wires ready for installation to...

MKA-64 Quick Release BracketEasily remove your electric steer and bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel...

MKA-62 Cable-Steer Quick Release BracketFor quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet, secure locking system. Fits 52" to 72" shaft foot-control motors and 62" shaft hand-control motors. They are designed to handle the increased torque of QUEST series...

RTA-61 Cable-Steer Quick Release BracketFor quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet and secure locking system. Fits foot control motors with up to a 45" shaft and hand control motors with up to a 52" shaft. They are...

MKA-57 Quick Release BracketThe bracket and top plate allow you to easily slide the motor inboard (10") or easily remove it for storage and security. Features anodized aluminum construction with stainless steel components and hardware for optimal corrosion protection in all saltwater or freshwater environments.Features: Slide motor inboard 10" for...

MKA-56 Quick Release BracketEasily remove your electric steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and is specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. The locking...