Deck / Galley

2-3/8" Stowable Post ClipsConveniently stow your 2-3/8″ posts when not in use. (sold in pairs, for bulk see #2400104).

Thread-Lock™ Base Socket CoverPlastic Thread-Lock™ cover keeps sockets clear when not in use. Use on seat bases and table bases. (sold as each).

Stowable Base Socket CoverPlastic stowable cover keeps sockets clear when not in use. Used for any 2-3/8″ tapered post table base. (sold as each).

5-Legged Deck Base Floor Pod Replacement - 1/2"Floor pod replacements for a 5-legged deck base.

3/8" Straight Thru-Fitting for Use with LPG Copper Tubing or Solenoid WiringMeets ABYC Standard for non-abrasive and vaportight (non-pressurized) seal of continuous length of LPG supply line passing “Straight-Thru” watertight bulkheads and decks from inside cylinder locker to each appliance. #1438-8439 slides over and seals around our LPG hose assemblies...

1/2" Straight Thru Fitting for Use with LPG Supply HosesMeets ABYC Standard for non-abrasive and vaportight (non-pressurized) seal of continuous length of LPG supply line passing “Straight-Thru” watertight bulkheads and decks from inside cylinder locker to each appliance. #1438-8439 slides over and seals around our LPG hose assemblies (except #40407...

17lb Vertical Fiberglass Composite LPG Cylinder with Type 1 Valve - OPD, DOT, TC ApprovedThis composite propane tank has an internal bladder encased in fiberglass, which allows users to see the gas level. The propane construction also means this cylinder is lighter than a standard steel cylinder.Features: Non-corrosive 3-layer fiberglass...

Low-Pressure Brass Solenoid Shut-Off Valve 1/4" Ports & 2 Brass Connection Fittings12VDC Low Pressure Brass Solenoid has 1/4” FPT ports. Connects to the Regulator outlet port with a reducing Hex nipple (included). Connect a Supply Hose to the outlet port of the Solenoid with a 90º Flare Elbow (included). It...

12VDC Low-Pressure Brass Solenoid Shut-Off Valve 3/8" Female Ports & 2 Brass Connection Fittings12VDC Low Pressure Brass Solenoid has 3/8” FPT ports. Connects to the Regulator outlet port with a hex nipple (included). Connect a Supply Hose to the outlet port of the Solenoid with a 90º Flare Elbow (included)....

Single Stage Regulator with 300 PSI Pressure Gauge with Wall MountUL Listed, die cast body with 3/8” FTP outlet is assembled with 300 psi leak test gauge (low profile, water tight, stainless steel), and wall mount brackets. Connect pigtail hose (item 1014-1415-20 or 1014-1401-20) to regulator inlet and one or...

Single Stage Regulator with 300 PSI Gauge & 20" Pigtail with Wall MountA single-port, single-stage, remote-mounted regulator. It comes complete with a pressure gauge, mounting brackets, and a 20" POL pigtail hose.Specifications: Die-cast zinc body 3/8" FPT outlet 20" POL pigtail hose included Dimensions: 6 1/2" H x 3 1/4"...

Single Stage Regulator with 300 PSI Gauge with Tank MountThe most compact low-pressure regulator that meets ABYC marine standard with a gauge for the required LPG System Leak Test1. It is fully assembled and leak tested with solid brass: male POL cylinder fitting, street tee & 300 psi gauge (low...

10' High-Pressure Supply Hose with 3/8" Female Swivel Flare Fitting on Each EndEasy to install and won't corrode or develop stress/fatigue cracks. This UL-listed hose is fully assembled and leak tested with solid brass fittings (3/8" female swivel flare each end), and high-pressure LPG hose.

15' High-Pressure Supply Hose with 3/8" Female Swivel Flare Fitting on Each EndEasy to install and won't corrode or develop stress/fatigue cracks. This UL-listed hose is fully assembled and leak tested with solid brass fittings (3/8" female swivel flare each end), and high-pressure LPG hose.

20' High-Pressure Supply Hose with 3/8" Female Swivel Flare Fitting on Each EndEasy to install and won't corrode or develop stress/fatigue cracks. This UL-listed hose is fully assembled and leak tested with solid brass fittings (3/8" female swivel flare each end), and high-pressure LPG hose.

20" Pigtail Hose Quick Connect with 1/4" Male Inverted Flare FittingUse to connect wall-mount regulators to cylinders with New Type 1 valves (outside R.H. Threads). Fully assembled, leak tested, and UL Listed. 20” high-pressure hose with 1/4” male inverted flare fitting X thermoplastic QCC Nut for quick and easy hand-tight...

20" Pigtail Hose Male Fitting x 1/4" Male Inverted Flare FittingUse to connect wall-mount regulators to LPG cylinders (inside valve – left-hand thread). Fully assembled and leak tested with solid brass: male POL cylinder fitting, 1/4” male inverted flare, and high-pressure, LPG hose, UL Listed assembly. 20” Standard Length.Size: 1/4”...