Boat Outfitting

ShadeFin Adjustable Rod Holder MountLightweight and versatile, the Adjustable Rod Holder Mount for ShadeFin makes adding shade to your boat easy! Sliding the gimbal-slot butt end over the rod holder’s gimbal pin makes a secure, quick connection. A beveled, nylon sleeve is included, in the instance the rod holder opening...

ShadeFin Adjustable Clamp-On Pipe MountFor boats with limited or no rod holders, the Adjustable Clamp-On Pipe Mount is a great solution for secure placement of ShadeFin. This mount fits 3/4" or 1" schedule-40 pipe or 1-1/4" O.D. tube. Once this mount is secured to your desired location, easily adjust the...

ShadeFin Fixed Clamp-On MountFor boats with minimal or no rod holders, mount your ShadeFin to 3/4" or 1" schedule-40 pipe or 1-1/4" O.D. tube with the Fixed Clamp-On Mount. This is a secure and economical mount manufactured from Type-316L polished stainless steel. It's easy to install and comes with a...

Rubber Bellows for Joysticks Replacement rubber bellows for Vetus joysticks.Compatible With: BPAJ joystick BPJ5D joystick BPJDE2 joystick BPJDSE joystick BPJE2 joystick BPJR joystick BPJSE joystick BPJSTA joystick BPJSTH5 joystick EHPJSTA joystick *Sold as an Individual

Stainless Steel Pedestal Guard Mounting Feet - PairEdson Pedestal Guard Mounting Feet are available in pairs as a direct replacement for Edson’s black plastic feet. Gasket and bushing allow for mounting 1”, 1-1/8” or 1-1/4” guard pipes. Nuts and washers included.

Horizontal Rail Accessory Mount - 3" DiskEdson’s Stainless Horizontal Rail Accessory Mount puts your hand-held GPS securely and conveniently within reach on your Steering Pedestal Guard. With its 3" Disk Platform you can mount your GPS hand held or other items that need a secured place to stay.Designed to attach to...

3" Stainless Clamp-On Accessory MountEdson's 3" Stainless Clamp On Accessory Mount allows you to mount drink holders, instruments or nearly anything else that requires a secure location on the pedestal guard.  For angled guards, they rotate and lock in place with set screws so you can mount your drink holder...

7" Stainless Clamp-On Accessory Mount Edson's 7" Stainless Clamp On Accessory Mount allows you to mount drink holders, instruments or nearly anything else that requires a secure location on the pedestal guard.  For angled guards, they rotate and lock in place with set screws so you can mount your drink holder...

Molded Compass Cylinder - WhiteEdson’s Compass Cylinders are distinctive, non-reflecting, and virtually indestructible. Great for new boats or upgrading your existing pedestal to a larger, easier to read compass. Fits Edson’s 335 and 336 pedestals, stands 5-1⁄2” high and accommodates flush mounted compasses up to a 6-7⁄8” flange diameter.

Starlink High-Performance Flat Dish Mounting PlateEdson's Starlink mounting plate allows you to mount a High-Performance Flat Dish to our Vision Series mounts. Choose the Starlink plate as "Step 2" in our 3-step Vision Series system and you're on your way.Powder-coated white matches the Vision Series line, including mounting hardware and...

Yamaha 200-250HP Anode KitContents: (1) 01112AL (1) 01124AL Material: AluminumPackaging: PolybagHardware: Included Specifications: Material: Aluminum Box Dimensions: 4"H x 4"W x 8"L WT: 1.4 lbs UPC: 8059617816018 Quick Guide (pdf)Owner's Manual (pdf)

Replacement Portlight Lens Only - 5" x 12" - SmokeReplacement lens only for Beckson Opening PortsFeatures: 5" x 12" Smoke

GatorSkinz™ Non-Skid Step Pad - Black Grit - 16" x 4"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers...

GatorSkinz™ Non-Skid Step Pad - Black Pebble - 16" x 4"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers...

GatorSkinz™ Non-Skid Step Pad - Black Grit - 12" x 24"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers...

GatorSkinz™ Non-Skid Step Pad - Grey Grit - 16" x 4"Non-Slip traction mats for trailers, boats, and docks with 3M Adhesive System. Available in Pre-Cut 16" x 4" Step Pads or 24" wide bulk roll by the foot for custom cuts to meet the needs of your project.Features: Auto-grade polymers...

Mercury 15, 20 Remote Shift/Throttle & Tiller (2011-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your...

RibPort Base with 3M Backing - GreyTired of being limited to rigging and outfitting your inflatable boats, stand-up paddle boards, and coolers the traditional way? Introducing the revolutionary RAILBLAZA RibPort Base with 3M Backing! This innovative product allows you to enhance your water adventures by adding StarPort attachments such as...

Transom Mounting Hardware KitBuilt tough for serious anglers, Power-Pole's transom mounting hardware kit makes direct-to-transom mounting simple and reliable. Designed for all Power-Pole shallow water anchor models, the kit comes with bolts, washers, and nuts—engineered to handle the demands of life on the water.This product may not be returned to...

Medium Starboard Dog Dish with Bowls - 8" TallDon't forget about your buddy! Whether in the boat or back at home, these elevated dog dishes are better for your dog and attractive enough for the house or boat. FDA approved King Starboard means if your buddy chews on it no...