$100 to $250

Euro-Style Rocker Switch ControlThis control is ergonomically designed, water resistant and provides a positive "click" when the trim tabs are engaged. Its lockout feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into any existing Bennett 2 1/2-inch Rocker...

Euro-Style Rocker Switch ControlThis control is ergonomically designed, water resistant and provides a positive "click" when the trim tabs are engaged. Its lockout feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into any existing Bennett 2 1/2-inch Rocker...

Actuator Assembly - 13.75" Closed LengthActuator assembly is complete hydraulic cylinder. Piston-like strong arm that pushes tab into position. Sophisticated plastic resin body. Nylon upper hinge. Bends 5° in actual use. Fluid flows through concealed hole in upper hinge thus eliminating external hoses subject to damage. Hearty and flexible enough...

Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position. Fluid flows through a concealed hole in the upper hinge at the top of the actuator - thus eliminating external hoses subject to damage.A1200S is designed for installations where space is limited. WARNING: This...

Auto Tab RetractorAutomatically retracts tabs when boat?s ignition is turned off. Trailered or dry storage boats have added defense from trim tab damage with them "full-up" during hauling, trailering and storage. Ensures trim tabs are all the way up every time boat is started if boat is not equipped with...

HST-DFSBLTransom-mount, dual frequency skimmer with built-in temperature sensor.Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-335C DF, LMS-337C DF, LMS-339C DF iGPS, LMS-480, X105C DF, X107C DF, X126DF, X136DF, X59DF Specifications: Chirp: No Mounting Style: Transom Imagining: Standard Cable Length (Feet): 20' Temperature: Yes Speed Included: No Pins:...

Compatible with the following: ST40 Instruments Compatible hull material: Aluminum and fiberglassCable: 30ft (10m) CableHole Diameter for installation: 2"Depth Only Specifications: Cable Length (Feet): 30' Temperature: No Speed Included: No Mounting Style: Thru-Hull Chirp: No Box Dimensions: 4"H x 6"W x 6"L WT: 1.15 lbs UPC: 723193260098

ST300 Thru-hull Shorty™The S300/ST300 speed sensors are our lowest cost and shortest thru-hull speed sensors. As part of our Shorty™ Series, they are designed for boats with low headroom. The plastic P371 low profile outer housing option is nearly flush and minimizes drag with only 5 mm (3/16") extending outside...

Shoot-Thru-Hull, wide cone angle, 200 kHz "POD" transducer with external temperature sensor. Specifications: Cable Length (Feet): 20' Temperature: Yes Speed Included: No Pins: 7 Mounting Style: In-Hull Imagining: Standard Chirp: No Box Dimensions: 4"H x 5"W x 10"L WT: 1.5 lbs UPC: 042194524214

Rooftop MountingFour rugged, watertight mounting pads secure the TracVision A7 or A9 to the roof for a streamlined installation. A single cable connects the antenna to the receiver below.

Transducer Extension Cable, 5 meterAdds 5 meters of length to the stock transducer cable.Works with the L755, L760, L770, L1250, L1260, and DSM compatible systems. Specifications: Type: Extension Box Dimensions: 2"H x 7"W x 8"L WT: 0.9 lbs UPC: 023193660103

NMEA Cable, 1 x 7 Pin Connector, 5 MetersReplaces Furuno Part # 000-144-418WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 16' Box Dimensions:...

PT3010 Base Wedge f/PowerTower® Radar Mounts - 4°Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway.Compatible with:Composite and Aluminum PowerTower®Features: Enhance the performance of your radome...

Lake-Troll™Get into the strike zone and let the fish come to you.GET IN THE GAMEThese hardworking, durable downriggers are ideal for smaller boats and fishermen just beginning to realize the advantage of fishing a downrigger. Our manual downriggers are built to deliver trusted Cannon® performance while standing up to harsh...

Digi-Troll IV TransducerProvides bottom tracking ability to Digi-Troll IV downriggers. Network up to six downriggers to troll at set distances from the bottom through this single transducer.Includes mounting bracket and hardware.Part Number: 1491072WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of...

MKA-32 Electric Steer Quick Release Bracket with Cover Features: Designed for fast removal of any Terrova™, PowerDrive™ V2, or PowerDrive bow-mount trolling motor Cam-lock design features ultra-tight tolerances that eliminate bracket movement and noise The locking lever includes a pin and lanyard Upper and lower plates include slots for securing with...

Transom Mount TransducersTransom Transducers mount on the transom (back) of the boat in contact with the surface of the water. To prevent damage to the boat or transducer. Transom mount hardware is included with the transducer.Description: New transom mount transducer design. Single/Dual Beam, 20/60 Degree, 200/83 kHz with built in...

Trolling Motor TransducerTrolling Motor Mount Transducers are designed to mount on to the body of most trolling motors. A low profile shape reduces drag in the water and minimizes interference with weeds. Trolling Motor Transducers are often used in conjunction with the standard Transom Mount Transducer and connected by a...

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there...

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there...