Outrigger Accessories

Aluminum Center Rigger Pole Holder Made of polished 100% anodized marine grade aluminum for functionality and style Holds poles with a 1-1/2" base Precision machined Fits inside rod holders for easy use

22mm Triple Micro Block with Becket - FishingLow-friction Micro blocks are compact and lightweight. Specifications: Sheave: 22mm / 7/8in. Length: 64mm / 2.5in. Weight: 64g / 2.25oz. Maximum line: 6mm / 1/4in. Maximum working load: 227kg / 500lb Breaking load: 544kg/ 1200 lb

22mm Triple Micro Block with Cam Cleat - FishingLow-friction Micro blocks are compact and lightweight. Specifications: Sheave: 22mm / 7/8in. Length: 51mm / 2in. Weight: 99g / 3.5oz. Maximum line: 6mm / 1/4in. Maximum working load: 227kg / 500lb Breaking load: 544kg/ 1200 lb

25mm Wire Block with Shackle - FishingLightweight, low-friction wire blocks carry wire halyards and high-strength control lines.Specifications: Sheave: 25mm / 1in. Weight: 28g / 1oz. Shackle pin: 5mm / 3/16in, Maximum wire: 2mm / 3/32in. Maximum line: 4mm / 5/32in. Maximum working load: 454kg / 1000lb Breaking load: 907kg/ 2000...

37.12mm Forged Eyestrap - FishingEyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. Specifications: Weight: 10g / .35oz Fasteners: 5 RH mm / #10 RH in Breaking load: 1130 kg / 2500lb

5mm Long Shackle - FishingForged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter.Long shackles have a similar shape to "D" shackles but are proportionally longer for their width.Specifications: Shackle pin: 5mm / 3/16in Weight: 22g / 0.78oz Maximum working load: 540kg...

8mm High Resistance "D" Shackle - FishingForged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. High-Resistance (HR) shackles are forged in 17-4PH stainless steel to handle high loads. They have an "HR" imprint for easy identification.Specifications: Shackle pin: 8mm / 5/16in...

Micro Carbo-Cam Base with Bullseye - Fishing471 Micro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.Specifications: Height: 22mm / 7/8in. Weight: 50g / 1.75oz Minimum line: 3mm / 1/8in Maximum line: 6mm / 1/4in Fastener spacing: 27mm / 1-1/16in Fasteners: 4 FH mm / #8 FH in...

Micro Standard Carbo-Cam Base with Bullseye - FishingMicro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.Specifications: Height: 33mm/1-5/16in Weight: 85g/3oz Minimum line: 3mm / 1/8in Maximum line: 10mm / 3/8in Fastener spacing: 27mm / 1-1/16in Fasteners: 5 FH mm / #10 FH in Maximum working load: 91kg/...

Gunnel Mount Outrigger HoldersOH2016SSize: 1.75"Dimensions: 3 1/2 x 6Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service...

Side Mount Outrigger HoldersOH2018SSize: 1.75"Dimensions: 4 1/2 x 7 1/2Side Mount Bracket utilizes same curved tube as Gunnel Mount. One piece Bracket construction. Tube, Feet and Bar-Pin are all cast simultaneously for the ultimate in strength. Unit provides same three positions as Flush Mount. Same rugged Chrome on Brass Cosntruction.WARNING:...

Gunnel Mount Outrigger HoldersSize: 2.0"Dimensions: 4 x 6 1/2Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service...

Side Mount Outrigger HoldersOH2020SSize: 2.0"Dimensions: 4 3/4 x 7 1/2Side Mount Bracket utilizes same curved tube as Gunnel Mount. One piece Bracket construction. Tube, Feet and Bar-Pin are all cast simultaneously for the ultimate in strength. Unit provides same three positions as Flush Mount. Same rugged Chrom on Brass Cosntruction.WARNING:...

AL7211CRThe AL7211CR (1-3/8"ID) is the perfect holder for boats in the 16 to 31 ft range. Its economical price and small footprint (3"x 5") make it our most popular center rigger holder. The receiving tube of this marine grade anodized holder is set at a 45 degree angle. This is...

AL7001CRThe AL7001CR (1-3/8"ID) is the solution for boats with a tower or when a lower angle is desired. It has a slightly larger footprint (4"x 7"). Ruggedly constructed from marine grade anodized aluminum. It can be easily attached above or below the standing platform or any flat surface. It comes...

MX7000CRAdjustable Angle holders MX7000CR (1-1/2" ID) are our strongest and most versatile holders. The three point mounting distributes the stress and provides side support. This heavy duty unit allows you to set your outrigger angle for maximum efficiency. The angle is set by positioning the clamp on the main tube...

Center Rigger Single Rig - No Release Clip 1 - Hanks Black Braided Line 1 - 5/16in x 12in Tension Cords 1 - Eye Straps with Screws 2 - Snap Swivels 1 - Ball Stops *Release Clip NOT Included

Center Rigger Single RigRK0322RK/CR1 - Hanks Black Braided Line1 - Black's Release Clips 1 -5⁄16" x 12" Tension Cords 1 - Eye Straps with Screws2 - Snap Swivels1 - Ball Stops

AL7301CRFits 1.050" PipeThe AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.

AL7302CRFits 1.315" PipeThe AL7300 (1-3/8"ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.